- per page
Valve stem seals included.
Weight of set and packing approximately 240g
The manufacturer recommends that the LT1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Click here
to subscribe for 'Back-in-stock' notifications
Genuine Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Lister Petter part number 657-23523
High quality de-coke gasket sets suitable for use on genuine Lister CS engines, models 3-1 and 3.5-1.
Equivalent to Lister Petter part number 657-10360.
Not suitable for the other CS models which have a 4.5" cylinder bore and therefore utilise a different head gasket.
High quality overhaul gasket sets suitable for use on genuine Lister CS engines, models 3-1 and 3.5-1.
Equivalent to Lister Petter part number 657-10370
Not suitable for the other CS models which have a 4.5" cylinder bore and therefore utilise a different head gasket.
Lister CS crankshaft oil thrower ring, suitable for use on older original Lister CS engines of all sizes which use the original style bush bearings.
Equivalent to Lister P/N: 008-02170, 8-2-170 and 5-1/B170.
A pair of new felt crankshaft oil seals, suitable for use on older original Lister CS engines of all sizes and Indian Listeroid engines which use the original style bush bearings.
Equivalent to Lister P/N: 003-00664
Equivalent to Lister P/N 352-15460
Equivalent to Lister P/N 353-15460
Equivalent to Lister P/N 657-19686
Equivalent to Lister P/N 657-19716
Equivalent to Lister P/N 657-19706
Equivalent to Lister P/N 657-19727
Equivalent to Lister P/N 657-19747
Lister LR1 full overhaul gasket set.
Lister LT1, air cooled Diesel, 1 cylinder, 408cc 1974 -
Without oil seals but valve stem seal included. Equates to 657-28576
Weight of set and packing approximately 490g Pack size 310 x 430 x 40
Lister LV1 air cooled Diesel, 1 cylinder, 477cc, 1974 -
Includes felt oil seal and valve stem seals.
Equivalent to Lister P/N 657-29443
This gasket equates to 201-11130 and is made from a non-asbestos high temperature composite material.
Equivalent to Lister P/N 201-50640
Equivalent to Lister P/N 201-50610
Equivalent to Lister P/N 201-50620
Suitable for use with SR, SL, LD and LR models.
Suitable for use with SR, SL, LD and LR models.
Equivalent to Lister P/N 201-26110
Lister SR2 air cooled Diesel, 2 cylinder, 1104cc, 1961 - 75
Equates to 657-10758
Weight of set and packing approximately 460g Pack size 310 x 430 x 40
This gasket equates to 201-80660 and 201-51040 and is made from a non-asbestos high temperature composite material.
Felt crankshaft oil seals equivalent to Lister Petter P/N 201-80281.
Suitable for use on Lister ST1, ST2, ST3, TS1, TS2 and TS3 engines.
Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Oil seals not included. Equates to 657-23535
Weight of set and packing approximately 590g Pack size 310 x 430 x 40
Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Oil seals not included. Equates to Lister Petter part number 657-23520
Weight of set and packing approximately 375g Pack size 245 x 353 x 25
Lister ST3 air cooled Diesel 3 cylinder 1900cc 1975 - 83
Includes flywheel end felt oil seal. Gear end oil seal not included.
Equates to 657-23557
Lister ST3 air cooled Diesel cylinder 1900cc 1975 - 83
Equates to 657-23541
Weight of set and packing approximately 550g Pack size 310 x 430 x 40
This gasket is equivalent to Lister Petter part number 201-33420 and is made from a non-asbestos high temperature composite material.
Lister TR1 air cooled Diesel, 1 cylinder, 775cc
No oil seals but includes valve stem seals. Equates to 657-33091
Weight of set and packing approximately 540g Pack size 310 x 430 x 40
The manufacturer recommends that the TR1 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Lister TR1 air cooled Diesel, 1 cylinder, 775cc
Equivalent to Lister Petter part number 657-33301
The manufacturer recommends that the TR1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Lister TR2 air cooled Diesel, 2 cylinder, 1550cc
No oil seals but includes valve stem seals, equates to 657-33371
Weight of set and packing approximately 610g Pack size 310 x 430 x 40
The manufacturer recommends that the TR2 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Lister TR3 air cooled Diesel, 3 cylinder, 2325cc
No oil seals but valve stem seals included. Equates to 657-33391
Weight of set and packing approximately 1000g Pack size 310 x 430 x 40
The manufacturer recommends that the TR3 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Lister TR3 air cooled Diesel, 3 cylinder, 2325cc
Includes valve stem seals and equates to 657-33381
Weight of set and packing approximately 460g Pack size 220 x 280 x 40
The manufacturer recommends that the TR3 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Lister TS1 air cooled Diesel 1 cylinder, 635cc 1985 - on
No oil seals but includes valve stem seals. Equates to 657-32681
Weight of set and packing approximately 600g Pack size 310 x 430 x 40
The manufacturer recommends that the TS1 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Lister TS1 air cooled Diesel, 1 cylinder, 635cc, 1985 - on
Includes valve stem seals. Equates to 657-32671
Weight of set and packing approximately 320g Pack size 220 x 280 x 40
The manufacturer recommends that the TS1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Lister TS2 air cooled Diesel 2 cylinder, 1265cc 1983 - on
No oil seals but includes valve stem seals.
Equates to 657-29511
Weight of set and packing approximately 750g Pack size 310 x 430 x 40
The manufacturer recommends that the TS2 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
A quality lower rocker cover gasket suitable for use with the AVA and PH series engines.
1 x Side Cover Gasket
A bottom end gasket set suitable for the Petter PJ1, PJ1Z, PJ2, PJ2Z and PJWZ engines.
Equivalent to Petter part number 344108.
A top end gasket set suitable for the Petter PJ1, PJ2, PJ1Z, PJ2Z, PJ3 and PJ4 engines.
Equivalent to Petter part number 359500.
- per page
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (25)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
