Bryce injectors for the the Petter AA1, AB1, ABW and early AC / AD engine series. These injectors are fitted with the flat tipped nozzle type and a short nozzle holder which leaves the nozzle protruding clear of the holder. These are for the earlier engines only and will not replace the later style injectors with the extended nozzle holder that shrouds the nozzle tip.
Body number Bryce NSDOA35DO368
Nozzle type P1S4S437
Set at a pressure of 2650 PSI
Suitable for all engine speeds
Fully reconditioned and set to the correct pressure for the AA1, AB1 & ABW engine series.
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
Reconditioned Bryce or CAV injectors for the the Petter AC1 & AC2 later style engine series. These injectors are fitted with the flat tipped nozzle type and a long nozzle holder which shrouds the nozzle. These are for the later engines only and will not replace the early style injectors with the shorter nozzle holder that leaves the nozzle tip protruding.
Petter P/N 344042 or ACB265
Body number Bryce NSDOA048D0507
Nozzle type P1S4S437
Set at a pressure of 2650 PSI
Suitable for engine speeds of 3000 to 3600 RPM
Fully reconditioned and set to the correct pressure for the Petter AC1 and AC2 engine series.
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
New Delphi injectors for the the Petter AC1 & AC2 later style engine series. These injectors are fitted with the flat tipped nozzle type and a long nozzle holder which shrouds the nozzle. These are for the later engines only and will not replace the early style injectors with the shorter nozzle holder that leaves the nozzle tip protruding.
Petter P/N 344042 or ACB265
Body number Bryce NSDOA048D0507 or 99-395
Nozzle type P1S4S437
Set at a pressure of 2650 PSI
Suitable for engine speeds of 3000 to 3600 RPM
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
Suitable for all A series Petter engines with in tank mounted filter assemblies such as the Petter AA1 , AB1 , AC1, AC1Z, AC1ZS, AC1W, AC2, AC2W, AD1, AD2, BA1 and BA2 enginse
A replacement fuel filter element for the cartridge fuel filter assembly fitted to many Lister Petter engines.
Equivalent to Lister Petter P/N 201-13118
Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.
Dimensions are O.D. 55mm x I.D. 23mm x H 37mm
Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.
Genuine Lister Petter air filter assembly for MOD specification Petter A series engines.
This assembly has a slightly different manifold connection arrangement to normal Petter A series engines. The base of the air cleaner does not have a jubilee clip style boss for connection to the manifold but three studs instead for a more secure connection.
Can be used on normal spec A series engines providing your prepared to make a small adapter plate.