High quality de-coke gasket sets suitable for use on genuine Lister CS engines, models 3-1 and 3.5-1.
Equivalent to Lister Petter part number 657-10360.
Not suitable for the other CS models which have a 4.5" cylinder bore and therefore utilise a different head gasket.
A quality top end gasket set suitable for the Petter PAZ1 engine.
Equivalent to Lister Petter part number 264347 or to Payen part number CC430.
High quality de-coke gasket sets suitable for use on genuine Lister CS engines, models 5-1, 6-1, 8-1, 10-2, 12-2 and 16-2.
Equivalent to Lister Petter part number 657-10380. Two sets will be required for the twin cylinder models.
Not suitable for the 3-1 and 3.5-1 models.
Equivalent to Lister P/N 351-10510
The manufacturer recommends that the LD1 is decarbonised after 1000 hours, an exercise that will require the gaskets and joints contained in a top set.
This gasket equates to 201-11130 and is made from a non-asbestos high temperature composite material.
This gasket equates to 201-80660 and 201-51040 and is made from a non-asbestos high temperature composite material.
Felt crankshaft oil seals equivalent to Lister Petter P/N 201-80281.
Suitable for use on Lister ST1, ST2, ST3, TS1, TS2 and TS3 engines.
This gasket is equivalent to Lister Petter part number 201-33420 and is made from a non-asbestos high temperature composite material.
Quality aftermarket Petter AVA1, AVA2, PH1 and PH2 engine decoke gasket sets.
Equivalent to Lister Petter P/N 359503.
This is a one cylinder set for single cylinder engines, If you need enough for a twin cylinder engine two sets will be required.
High quality overhaul gasket sets suitable for use on genuine Lister CS engines, models 5-1, 6-1 and 8-1.
Equivalent to Lister Petter part number 657-10392.
Not suitable for the 3-1, 3.5-1 and twin cylinder models.
Equivalent to Lister P/N 352-15460
This gasket is equivalent to Lister P/N 201-11130 or 201-11131.
The manufacturer recommends that the LR1 is decarbonised after 1000 hours, an exercise that will require the gaskets and joints contained in a top set.
A top end gasket set suitable for the Petter PJ1, PJ2, PJ1Z, PJ2Z, PJ3 and PJ4 engines.
Equivalent to Petter part number 359500.
Lister LR1 full overhaul gasket set.
Valve stem seal included. Equates to 657-25999
Weight of set and packing approximately 240g
The manufacturer recommends that the LT1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Suitable for use with SR, SL, LD and LR models.
Lister TR1 air cooled Diesel, 1 cylinder, 775cc
Equivalent to Lister Petter part number 657-33301
The manufacturer recommends that the TR1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
1 x Side Cover Gasket
A bottom end gasket set suitable for the Petter PJ1, PJ1Z, PJ2, PJ2Z and PJWZ engines.
Equivalent to Petter part number 344108.
Valve stem seals included.
Weight of set and packing approximately 240g
The manufacturer recommends that the LT1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
High quality overhaul gasket sets suitable for use on genuine Lister CS engines, models 3-1 and 3.5-1.
Equivalent to Lister Petter part number 657-10370
Not suitable for the other CS models which have a 4.5" cylinder bore and therefore utilise a different head gasket.
Lister LT1, air cooled Diesel, 1 cylinder, 408cc 1974 -
Without oil seals but valve stem seal included. Equates to 657-28576
Weight of set and packing approximately 490g Pack size 310 x 430 x 40
Suitable for use with SR, SL, LD and LR models.
Lister TR1 air cooled Diesel, 1 cylinder, 775cc
No oil seals but includes valve stem seals. Equates to 657-33091
Weight of set and packing approximately 540g Pack size 310 x 430 x 40
The manufacturer recommends that the TR1 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Top quality non genuine copper/non asbestos head gasket suitable for use on air cooled Petter PH engines with an 87.3mm bore diameter.
Lister CS crankshaft oil thrower ring, suitable for use on older original Lister CS engines of all sizes which use the original style bush bearings.
Equivalent to Lister P/N: 008-02170, 8-2-170 and 5-1/B170.
A pair of new felt crankshaft oil seals, suitable for use on older original Lister CS engines of all sizes and Indian Listeroid engines which use the original style bush bearings.
Equivalent to Lister P/N: 003-00664
Equivalent to Lister P/N 353-15460
Lister ST1 air cooled Diesel 1 cylinder 635cc 1975 - 85
Equates to 657-23503
Weight of set and packing approximately 270g Pack size 245 x 353 x 25
Lister TR2 air Cooled Diesel, 2 cylinder, 1550cc
Includes valve stem seals and equates to 657-33361
The manufacturer recommends that the TR2 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
A quality lower rocker cover gasket suitable for use with the AVA and PH series engines.
Overhaul gasket sets suitable for use on Petter AVA1 and PH1 engines.
This set is effectivly a top end decoke set and a bottom end set in one package.
Equivalent to Lister Petter part number 334273 and 359503 combined into a single product.
Equivalent to Lister P/N 202-11582
Equivalent to Lister P/N 201-26110
Lister ST1 air cooled Diesel 1 cylinder 635cc 1975 - 85
Oil seals not included. Equates to 657-23516
Weight of set and packing approximately 485g Pack size 310 x 430 x 40
Lister TR2 air cooled Diesel, 2 cylinder, 1550cc
No oil seals but includes valve stem seals, equates to 657-33371
Weight of set and packing approximately 610g Pack size 310 x 430 x 40
The manufacturer recommends that the TR2 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Bottom end gasket sets from a range of manufacturers suitable for Petter AV1, AV2, AVA1, AVA2, PH1, PH2, PH1W and PH2W engines, equates to Lister Petter part number 334273.