Lister CS type decompression lever with fixing bolt for pivoting the arm into position under the valve lifter tappet.
Suitable for twin cylinder engines only.
Lister CS twin cylinder crankshaft suitable for use in Lister twin cylinder CS 10-2, 12-2 and 16-2 engines using the white metal bush type of main bearings.
Extremely good quality taper roller bearings suitable for Indian Lister CS type twin cylinder CS engines using the taper roller bearing system. This set includes the intermediate bush type bearing.
A pair of high pressure injector fuel lines suitable for twin cylinder CS engines.
A left and right hand pipe is supplied and whilst the number one cylinder is the same as used on single cylinder engines the number two cylinder requires a special pipe of the opposite hand.
Replacement casting for the cam shaft end support on twin cylinder engines, also acts as the mounting for the fuel pump and governor linkage assembly etc.
Supplied complete with a phosphor bronze bush fitted for the cam shaft.
Please select the correct type for the given side of the engine that the casting is required for. 574-10560 is for the end which carries the shut off lever which is also the gear end of the engine (see crankshaft to camshaft driving gear) and 574-10570 is for the flywheel end of the engine.
A good casting of the air inlet manifold for twin cylinder engines. The stud fixing holes have not been drilled, you will need to do this to suit your engines stud spacing.
The water manifold for either lower or upper connection of the two cylinder water jackets. The manifold does not have its stud holes drilled as this position varies from one engine to another. You will need to jig up and measure the position to drill the holes yourself.
Click here
to subscribe for 'Back-in-stock' notifications
A complete set of oil pipe work for the twin cylinder engine. Includes the oil strainer and a rouge debris catching magnet. Picture coming soon.
A complete twin cylinder governor linkage assembly. Very well made and carefully painted, all parts move as they should and the surfaces are clean and smooth.
Comes complete with the governor spring and adjustable hook.
Click here
to subscribe for 'Back-in-stock' notifications
Twin cylinder crankcase door, comes complete with the breather studs and gasket.
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Books & Transfers
Starting Handles (17)
Wolseley Engine Spares (34)
Ruston Hornsby Spares (31)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (11)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (26)
Plastigauge
Clearance Corner (4)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
