Petter AVA, PH & PAZ1 Engine Fuel Tank 6.8 Litre P/N 292970
Replacement 6.8 litre fuel tank suitable for Petter AVA, PH and PAZ1 engines.
Equivalent to Lister Petter part numbers 292970 and JE7
Supplied complete with a leak off connection and tank cap as well as the threaded union on the bottom of the tank.
The cap on the top is a conventional bayonet fitting with a rubber seal.
£78.00
including VAT
Petter PAZ1 Top Set
A quality top end gasket set suitable for the Petter PAZ1 engine.
Equivalent to Lister Petter part number 264347 or to Payen part number CC430.
£9.60
including VAT
Petter PAZ1 Bottom Set
Bottom end gasket sets suitable for the Petter PAZ1 engine.
Equivalent to Lister Petter part number 264348.
£14.40
Market price: £32.18
save 55%
including VAT
Petter PAZ1 Cylinder Shim P/N 254309
Petter PAZ1 cylinder shims approximatly 0.015" thick.
Lister Petter part number ZPB74 or 254309
£5.10
Market price: £5.70
save 11%
including VAT
Genuine Lister Petter Fuel Filter Assembly - P/N 284359
The later type of cartridge fuel filter assembly used widely across the Lister Petter range, including engine series:-
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Fitted with an aluminium top cover and a bowl to house the replaceable paper filter element. The top cover is female threaded to accept 1/4" BSP male unions at either side.
Equivalent to Petter P/N 95713, 284359, ASE64, ASE64A, AD600, 201-11613, 201-11614 and 201-11615
Many seasoned Lister Petter engine owners will recognise this as the standard AD600 type filter which accepts the common ACD60 paper element which is now known on P/N 201-13118 which is available separately if required.
£47.03
including VAT
Non Genuine Lister Petter Fuel Filter Assembly - P/N 284359
Click here
to subscribe for 'Back-in-stock' notifications
The later type of cartridge fuel filter assembly used widely across the Lister Petter range, including engine series:-
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Fitted with an aluminium top cover and a pressed steel bowl to house the replaceable paper element. The top cover is female threaded to accept 1/4" BSP male unions at either side.
Supplied complete with a filter element pre-fitted.
Equivalent to Petter P/N 95713, 284359, ASE64, ASE64A, AD600, 201-11613, 201-11614 and 201-11615
Many seasoned Lister Petter engine owners will recognise this as the standard AD600 type filter which accepts the common ACD60 paper element which is now known on P/N 201-13118 which is available separately if required.
£31.80
including VAT
Click here
to subscribe for 'Back-in-stock' notifications
Cartridge Fuel Filter Element - P/N 201-13118
A replacement fuel filter element for the cartridge fuel filter assembly fitted to many Lister Petter engines.
Equivalent to Lister Petter P/N 201-13118
Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.
Dimensions are O.D. 55mm x I.D. 23mm x H 37mm
Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.
£5.57
including VAT
General Purpose Replaceable Paper Cartridge Air Filter
A replaceable dry paper element type air filter assembly suitable for use on a huge variety of engines but especially Lister Petter engines.
£22.62
including VAT
Petter Air Filter Element 292364 for AC1ZS & PAZ1 Engines
Genuine Lister Petter air filter element as fitted on the Petter AC1ZS & PAZ1 Engines.
The dimensions are 140mm O.D. x 83mm I.D. x 60mm H
£9.34
including VAT
Genuine Petter PAZ1 Big End Shells P/N 390137 Standard Size
Genuine Lister Petter big end shells in standard size for the well known Petter PAZ1 single cylinder Diesel engines.
Lister Petter P/N 390137
£15.64
including VAT
Non Genuine Petter PAZ1 Big End Shells P/N 390137 Standard Size
Non genuine Lister Petter big end shells in standard size for the well known Petter PAZ1 single cylinder Diesel engines.
Equivalent to Lister Petter P/N 390137
£11.40
including VAT
Non Genuine Petter PAZ1 Big End Shells 0.010" Under Size P/N 390137/010
Non genuine Lister Petter big end shells in 0.010" under size for the well known Petter PAZ1 single cylinder Diesel engines.
Equivalent to Lister Petter P/N 390137/010
£11.40
including VAT
Non Genuine Petter PAZ1 Big End Shells 0.020" Under Size P/N 390137/020
Non genuine Lister Petter big end shells in 0.020" under size for the well known Petter PAZ1 single cylinder Diesel engines.
Equivalent to Lister Petter P/N 390137/020
£11.40
including VAT
Non Genuine Petter PAZ1 Big End Shells 0.040" Under Size P/N 390137/040
Non genuine Lister Petter big end shells in 0.040" under size for the well known Petter PAZ1 single cylinder Diesel engines.
Equivalent to Lister Petter P/N 390137/040
£11.40
including VAT
Petter PAZ1 Piston Assembly - Standard Size
Click here
to subscribe for 'Back-in-stock' notifications
Non genuine piston assembly in standard size for the well known Petter PAZ1 single cylinder Diesel engines.
Equivalent to Petter P/N 340704
£48.00
including VAT
Click here
to subscribe for 'Back-in-stock' notifications
Petter PAZ1 Piston Ring Set - Standard Size
Non genuine piston rings in standard size for the well known Petter PAZ1 single cylinder Diesel engines.
£7.20
including VAT
Petter PAZ1 Piston Ring Set 0.010" Over Size
Non genuine piston rings in 0.010" oversize for the well known Petter PAZ1 single cylinder Diesel engines.
Can be used in an engine with a standard cylinder bore diameter if gapped to suit.
£19.98
including VAT
Petter PAZ1 Piston Ring Set 0.020" Oversize
Non genuine piston rings in 0.020" oversize for the well known Petter PAZ1 single cylinder Diesel engines.
£19.98
including VAT
Petter PAZ1 Piston Ring Set 0.040" Oversize
Non genuine piston rings in 0.040" oversize for the well known Petter PAZ1 single cylinder Diesel engines.
£19.98
including VAT
Petter PAZ1 Injector Nozzle HL120S20B249P3
Bryce injector nozzles HL120S20B249P3 or direct equivelant for use on injectors fitted to all Lister Petter PAZ1 diesel engines.
£18.78
including VAT
Petter PAZ1 Bryce Fuel Injector Early Type 99/235 or BL52SD252
Quality refurbished Bryce fuel injectors, suitable for use on early Petter PAZ1 single cylinder engines using the BL52SD252 body.
These fuel injectors have been fully refurbished with a new HL120S20S249P3 nozzle and are supplied with all required sealing washers for the nozzle and pipe connections.
Injector body type BL52SD252
Fitted with nozzle HL120S20S249P3
Set at a pressure of 3150 PSI
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
£81.60
including VAT
Petter PAZ1 Bryce Fuel Injector
Quality refurbished Bryce 99/235 fuel injectors, suitable for use on Petter PAZ1 single cylinder engines using the NSDLA052D0359 body.
These fuel injectors have been fully refurbished with a new HL120520B249P3 nozzle and are supplied with all required sealing washers for the nozzle and pipe connections.
Injector body type NSDLA052D0359
Fitted with nozzle HL120520B249P3
Set at a pressure of 3150 PSI
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
£78.00
including VAT
 Bryce Fuel Pump FAOABO50B0139-552d5ebf67fb61032633163ab126f0a6.png)
Petter PAZ1 (Early) Bryce Fuel Pump FAOABO50B0139
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the early Petter PAZ1 series engines.
Bryce pump number FAOABO50B0139
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
£132.00
including VAT
Petter PAZ1 Bryce Fuel Pump FAOAB050C0179
Click here
to subscribe for 'Back-in-stock' notifications
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PAZ1 series engines.
Bryce pump number FAOAB050C0179
Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT
£132.00
including VAT
Click here
to subscribe for 'Back-in-stock' notifications
Petter PAZ1 Fuel Pump Rack Extension Spring
Petter PAZ1 fuel pump rack extension spring.
Equivalent to Petter part numbers ZPN141 and 259875
This part is now obsolete from Lister Petter.
£15.00
Market price: £32.32
save 54%
including VAT
Bryce Type Fuel Pump Rubber Bellows
Quality Bryce type fuel injection pump rubber bellows as used on many of the fuel pumps fitted to Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
These fuel injection pump bellows are suitable replacements for Petter P/N 367900 and fit the following pump types.
There are 2 fitted to each pump on the engine. Sold Individually
FA0AB080C0210
FA0AB080C0215
FA0AB080C0700
FA0AB080C0705
FA0AB080C0770
FA0AB080C0280
FA0AB080C0295
£3.00
Market price: £4.80
save 38%
including VAT
Petter Exhaust Silencer
Click here
to subscribe for 'Back-in-stock' notifications
Lister Petter exhaust silencer, part number 294158.
Â
Fitted to a wide range of Lister Petter engines such as PH1, PJ1 AV, AVA & PAZ1 in applications such as dumpers, water pumps, generators and mixers.
Â
This silencer uses a 1" BSP male end to screw into any suitable female manifold or extension pipe. These are new, old stock which have been in stock for some time and they have picked up a little surface rust. We have cleaned them up and re-treated with very high temperature silver paint (up to 500 celcius) so that they come up as good as new.
Â
The length of the body is 85mm plus 35mm of threaded pipe and the silencer diameter is 115mm.
Â
These retail from Lister Petter @ £117.46 plus postage & VAT. We are offering them at a bargain price!
£36.00
including VAT
Click here
to subscribe for 'Back-in-stock' notifications
Petter Exhaust Manifold Flange 1" BSP Petter P/N 250438
Petter exhaust manifold part number 250438.
Fitted to a wide range of Petter engines such as PH, AV, AVA & PAZ1 in applications such as dumpers, water pumps, generators and mixers.
These manifolds have a female 1" BSP socket to accept any suitable silencer or pipe.
Centre to centre distance of the stud holes is 2, 5/16"
£15.36
including VAT
Petter 1,1/2" Starting Handle
Click here
to subscribe for 'Back-in-stock' notifications
Petter style starting handles suitable for engines using 1.5" crankshaft diameters with a keyway to provide a location point for the ratchet pin housed in the starting handle to engauge with.
Equivalent to Lister Petter part number 193374.
£22.20
including VAT
Click here
to subscribe for 'Back-in-stock' notifications
Lister Engine Spares
Lister Start-O-Matic Spares (18)
Petter Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares
Fuel Injection
Water Pumps & Spares
Books & Transfers
Starting Handles (19)
Wolseley Spares (29)
Stuart Turner Spares (7)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (28)
Plastigauge
Genuine Lister Parts stock
