A high quality cast iron starting handle suitable for Lister LD, LR, SL, SR, ST and HR engines requiring a 1.5" diameter starting handle.
Equipped with a sprung loaded ratchet pin that engages with the crankshafts key way.
Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW.
Equivalent to Lister P/N 201-12510.
A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to an elbow.
A good quality 1/4" BSP swivel union plug / banjo bolt.
Equivalent to Petter P/N 831026
Suitable for use on the fuel filter assembly 284359 as commonly used on Petter AV, AVA, PH, PHW and Lister LD, SL, SR, ST engines etc.
Plated for corrosion resistance.
Genuine cylinder kits for Lister LR engines.
These cylinder kits comprise of:- 1 x Cylinder P/N 201-70110 and 1 x Piston assembly P/N 570-11308
The piston assembly includes the rings, gudgeon pin and circlips.
Lister LR cylinder on standard size.
These cylinders comprise of:- 1 x Cylinder equivalent tp P/N 201-70110
Genuine Lister LR piston assembly.
Piston assembly P/N 570-11308
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister LR piston assembly 0.010" over size.
Piston assembly P/N 570-11308/010
The piston assembly includes the rings, gudgeon pin and circlips.
Non genuine Lister LR piston ring sets on standard size.
Equivalent to Lister Petter P/N 570-12120
Non genuine Lister LR piston ring sets on 0.030" over size.
Equivalent to Lister Petter P/N 570-12120/030
Non genuine Lister LR piston ring sets on 0.040" over size.
Equivalent to Lister Petter P/N 570-12120/040
Non genuine Lister LR piston ring sets on 0.060" over size.
Equivalent to Lister Petter P/N 570-12120/060
Genuine Lister LR piston ring sets on standard size.
Lister Petter P/N 570-12120
New and supplied in original Lister packaging.
Genuine Lister LR1 crankshaft, new and on standard size.
Lister P/N P/N 570-11310
Genuine Lister inlet valve guides for Lister LR engines.
Lister P/N 201-70380
 Inlet & Exhaust Valve P-N 201-19360-b4ab1d5be7393e29881d13afce61313d.png)
Genuine Lister LD, LR, SL and pre 1970 SR inlet and exhaust valve.
Lister Petter part number 201-19360
Lister oil reservoir / priming cup.
Lister P/N 201-26480
Genuine Lister small end bush for Lister LD and LR engines.
Lister Petter P/N 201-10150
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
A high quality injector nozzle and pin suitable for the Lister LR series engines.
Lister part number 201-12063 or Bryce part number BDN4SDC6453
Bryce FAOABO60P6656
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11520 These shims are 0.005" thick which is approximately 0.125mm.
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11530 These shims are 0.010" thick which is approximately 0.25mm.
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11540 These shims are 0.012" thick which is approximately 0.3mm.
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister LD, LR and SL engines.
Equivalent to P/N 7032-26A or 1-290
Please check suitability for your pump before purchasing.
Lucas / Delphi or equivalent quality brand 1/488C fuel pump element.
Suitable for use in Lister LR fuel pumps with pump number FAOAB060P6656
Lucas 1/338 fuel pump delivery valve suitable for use in Lister LT, LV, LR, SR, ST, HA, HB and HR fuel pumps.
Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400
Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.
Threaded 1/4" BSP 19TPI.
Replacement 1 gallon / 5 litre fuel tank suitable for Lister LD1, LR1, SL1, SR1 & ST1 engines.
Equivalent to Lister Petter part number 201-11283
Supplied complete with a leak off grommet and tank cap as well as the threaded union on the bottom of the tank.
The cap on the top is a conventional bayonet fitting with a rubber seal.
Approx. dimensions 8" tall x 10" Long x 4.5" wide
A pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1 engines.
These quality aftermarket straps are made to fit our new 1 Gallon tanks on P/N 201-11283, equivalent to 2 x P/N 570-10630.
Sold as a pair, 2 x strap assemblies included.
Click here
to subscribe for 'Back-in-stock' notifications
Good quality non genuine Lister LR & SR main bearings.
Available on a variety of sizes and suitable for both the flywheel end and the gear end of LR and SR engines.
Equivalent to Lister Petter P/N 201-50060
Please select either standard or under size from the menu when ordering.
Lister LR & SR centre main bearings on standard size.
Lister Petter P/N 570-11171
Please select the size required when placing your order.
Lister LD, LR, LT, LV, SL and SR thrust washer set.
Lister Petter P/N 201-123810
Genuine Lister LD, LR & SL Flywheel Lock Washer
Lister Petter P/N 201-12230
Lister gear end crankshaft oil seal.
As used on the gear end of Lister LD, LR, SR and ST engines.
Lister Petter part number 201-13190
Lister reduction box oil seal.
As used on the 2:1, 3:1 and 1:1.61 reduction boxes commonly coupled to Lister LD, LR, SR and ST engines.
Lister Petter part number 201-22420
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (21)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (30)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (14)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (4)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
