Lister HL, HR & HRW Engine Spares

A high quality cast iron starting handle suitable for Lister LD, LR, SL, SR, ST and HR engines requiring a 1.5" diameter starting handle.

Equipped with a sprung loaded ratchet pin that engages with the crankshafts key way.

Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW.

Equivalent to Lister P/N 201-12510.

Lister HR and HRW inlet valve.

Lister P/N 351-50420

High quality piston assemblies for Lister HR engines.

These pistons are 0.020" over size and are equivalent to Lister Petter P/N 572-50122/020

Supplied as pictured with gudgeon pin, circlips and a ring set ready to be assembled.

High quality cylinders kits for Lister HR engines.

These cylinder kits comprise of 1 x cylinder, 1 x piston assembly complete with rings, gudgeon pin and clips. 

The cylinders are equivalent to Lister Petter P/N 353-80971 and the piston assembly is equivalent to P/N 572-50122 with ring set P/N 572-50622

NOZZLE LONG STEM
Part No.1 - HL176S30D525P2
Part No.2 - 5680403
Part No.3 - 351-50780

Set to 180 Atms or 2650 Psi.

Lister ST and HR series fuel injector copper washer.

Lister part number 351-40230

NOZZLE LONG STEM
Part No.1 - HL141S30D811P2

Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister HR engines.

Equivalent to P/N 1-312 or 7032-83B

Please check suitability for your pump before purchasing.

A general purpose fuel tank cap.

Bayonet fitting, dimensions as per the picture.

Ideal as a cost effective replacement where the sizes are suitable.

Lister water pump carbon seal assembly, as used on some of the Lister FR, JP, JW, HRW and HW models water pumps.

These do not fit all Lister water pumps, if you need assistance please contact us before purchasing.

Lister water pump carbon seal, as used on the Lister FR, JP, JW, HRW and HW models.

Lister P/N 291-21502

Lister water pump carbon seal spring, as used on the Lister FR, JP, JW, HRW and HW models.

Lister P/N 291-21524 and 291-21525