Lister D & DK Governor & Ignition

A quality pair of reproduction internal governor springs used on 700rpm Lister D type engines. The springs have twin looped ends as per the original design.

A quality reproduction of the governor spring used on Lister D, DK, A, AK, B and BK type engines.

The spring has twin tapered ends and a hook/loop as per the original design.

Equivalent to Lister P/N 3174

Suitable for:-
Lister D & DK engines up to 700 rpm.
Lister A, AK, B & BK engines up to 600 rpm.

A quality brass knurled nut for the spark plug terminal, threaded with an M4 thread for use with all standard spark plugs with metric screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

7mm HT ignition lead cable, copper wire core type manufactured by Lucas from black Hypalon material.

This HT lead looks and feels like rubber and is good where high temperatures prevail.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 100m.

Lister D magneto fixing bolt and washer set. This set comprises of three 3/8" BSW bolts / set screws equivalent to Lister part number S739 and three flat washers equivalent to Lister part number S184

A replacement 0.036" thick shim suitable for use on the Lucas RS1 and SR1 Magneto's which were commonly fitted to Lister D engines.

Suitable as a replacement to original Lister Part Number 1/1292.

Lucas SR1 and SR2 magneto points cover / end cover gasket. Die cut from high quality genuine Flexoid gasket paper.

Lucas P/N 458194

Newly manufactured points sets for the Lucas RS1 Magneto.

Equivalent to the original Lucas Part Number of 457525