Lister F Piston Assembly +0.060" Oversize
Added: 28/06/2022
 
(0 reviews)  

Genuine Lister / Hepworth domed top Aluminium pistons complete with rings for spec 12 & 13 Lister F type engines 0.060" oversize.

Supplied complete with four rings, two compression rings and two oil control rings.

If you are lucky enough to own an example of the rare F type that would benafit from a rebore this is your lucky day!

£96.00
including VAT
Qty
Lister F Piston Assembly +0.040" Oversize
Added: 28/06/2022
 
(0 reviews)  

Genuine Lister / Hepworth domed top Aluminium pistons complete with rings for spec 12 & 13 Lister F type engines 0.040" oversize.

Supplied complete with four rings, two compression rings and two oil control rings.

If you are lucky enough to own an example of the rare F type that would benafit from a rebore this is your lucky day!

£96.00
including VAT
Qty
Lister LD Piston Assembly 0.040" Over Size
Added: 28/06/2022
 
(0 reviews)  

Good quality piston assembly for Lister LD engines on 040" over size.

These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110

The piston assembly includes the rings, gudgeon pin and circlips.

£78.00
including VAT
Qty
Lister LD Piston Assembly 0.030" Over Size
Added: 28/06/2022
 
(0 reviews)  

Good quality piston assembly for Lister LD engines on 030" over size.

These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110

The piston assembly includes the rings, gudgeon pin and circlips.

£78.00
including VAT
Qty
Lister LD Piston Assembly 0.010" Over Size
Added: 28/06/2022
 
(0 reviews)  

Genuine Lister / Hepolite piston assembly for Lister LD engines on 010" over size.

These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110

The piston assembly includes the rings, gudgeon pin and circlips.

£78.00
including VAT
Qty
Petter TX Fuel Injection Pump Element 11-108GB
Added: 17/06/2022
 
(0 reviews)  

Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister TX engines.

Equivalent to P/N 11-108GA and 11-108GB compatible with pump FAOANO80E0846

Please check suitability for your exact pump before purchasing, contact us for assistance if you are unsure.

£27.60
including VAT
Qty
Lister J Piston Ring Set to Suit 4.25” + 0.010" Bore (4 Ring Set)
Added: 16/06/2022
 
(0 reviews)  

New, high quality piston ring set suitable for Lister J petrol engines and Lister K kerosene engines with a 4.25” + 0.010" bore.

Compression Ring Dimensions:

  • Bore size 4.26” (108.2mm)
  • Height 1/4” (6.35mm)
  • Radial depth 0.165” (4.191mm)

Oil Scraper Ring Dimensions:

  • Bore size 4.26” (108.2mm)
  • Height 1/4” (6.35mm)
  • Radial depth 0.155” (3.937mm)

Please note: All rings will need to be gapped to suit your cylinder bore. As a general rule of thumb piston rings on vintage engines should have 0.003” of end gap per 1” of cylinder bore diameter (i.e. 4.25” bore would need 0.01275” ring end gap). Be sure to gap your rings on the smallest or unworn part of your bore, on worn or older engines that have not had a new liner fitted this would normally be towards the bottom.

£78.00
including VAT

Lister J Piston Ring Set to Suit 4.25” + 0.010" Over Size Bore (3 Ring Set)
Added: 16/06/2022
 
(0 reviews)  

New, high quality piston ring set suitable for Lister J petrol engines and Lister K kerosene engines with a 4.25” +0.010" bore.

This is a 3 ring set with 3 plain compression rings.

Compression Ring Dimensions:

  • Bore size 4.26” (108.2mm)
  • Height 1/4” (6.35mm)
  • Radial depth 0.165” (4.191mm)

Please note: All rings will need to be gapped to suit your cylinder bore. As a general rule of thumb piston rings on vintage engines should have 0.003” of end gap per 1” of cylinder bore diameter (i.e. 4.25” bore would need 0.01275” ring end gap). Be sure to gap your rings on the smallest or unworn part of your bore, on worn or older engines that have not had a new liner fitted this would normally be towards the bottom.

£66.00
including VAT
Qty