Ruston Hornsby Spares

A very well made pepper pot type exhaust silencer for use on almost any small stationary engine. Suitable for the Petter PH1 Engine.

Nicely finished in a gloss high temperature black powder coating it will resist corrosion well.

A quality composite head gasket die cut from WCL graphite material. Suitable for Ruston & Hornsby 8PB, 3HP engines.

A quality copper / composite head gasket hand made in the UK from quality materials.

Suitable for Ruston & Hornsby BPR engines.

These gaskets measures 7,1/2" OD by 4,5/8" ID.

A pair of quality reproduction valve springs suitable for the Ruston Hornsby PT, 6PB 1.5HP and Wolseley WD1 and WD2 engines.

Both these engines use the same size springs so they are universally interchangeable.

Quality British made reproduction igniter springs for the Ruston Hornsby 5AP open crank engine.

Sold individually.

Quality British made reproduction valve springs for the Ruston Hornsby 5AP open crank engine.

A long reach 3/4" by 18mm thread spark plug.

Equivalent to Lodge CB3 and Champion 7COM plugs.

A Champion D9 (CCH509) short reach 1/2" by 18mm thread spark plug suitable for use in Ruston Hornsby AP engines.

Replaces the Champion 17 and UK10 plugs.

A quality brass knurled nut for the spark plug terminal, threaded with an 8-32 UNC thread for use with older spark plugs with UNC screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

7mm HT ignition lead cable, copper wire core type manufactured by Lucas from black Hypalon material.

This HT lead looks and feels like rubber and is good where high temperatures prevail.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 100m.