Bosch Mico 032 and 034 series fuel pump control rod / rack.
Similar to CAV P/N 7009-19 and can be used on BPF1B series pumps but please note the rack only has a fixture at one end. You will not be able to mount an overload pawl when using this rack.
A quality 1/4" BSP female brass nut and solder olive for 1/4" outside diameter tube.
Used on copper fuel / oil tube to give a female swivel connection as found on many stationary engines, tractors, classic motorcycles and cars etc.
These fittings can be either soft soldered or silver soldered.
Bryce bleed screw suitable for use on FAOAB and FAOAN fuel pumps used on many Lister Petter single and multi cylinder engines including the Petter PH and PJ series engines.
Fits the following pumps and more:
Lister LD, LR, SL, SR, ST, HR
Petter PH1, PH2, PJ1, PJ2, PJ3, PJ4
Bryce P/N 1-126
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11520 These shims are 0.005" thick which is approximately 0.125mm.
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11530 These shims are 0.010" thick which is approximately 0.25mm.
Fits the following pumps:
FAOAB080C0210
FAOAB080C0215
FAOAB080C0700
FAOAB080C0705
FAOAB080C0770
FAOAB080C0280
FAOAB080C0295
Bryce FAOAR and FAOBR series fuel pump plunger spring.
Bryce P/N 11-120
CAV BPF1B series fuel pump control rod / rack.
Equivalent to CAV P/N 7009-19 and used on all BPF1B series pumps.
Due to the lack of availability of these Stationary Engine Parts has had a limited batch produced in order to support the refurbishment of old pumps and keep these pumps in operation.
Genuine Bosch Mico BPF1B series fuel pump delivery valve holder.
Equivalent to CAV P/N 7010-542 and used on all BPF1B series pumps fitted with element sizes ranging from 5mm to 8mm.
Genuine Bosch Mico BPF1B series fuel pump delivery valve springs.
Equivalent to CAV P/N 7032-7 and used on all BPF1B series pumps fitted with element sizes ranging from 5mm to 8mm.
Lister LPW fuel injector pipe.
Lister part number 751-40616
Lister LPWS fuel injector washer.
Lister part number 751-40630
Lister oil reservoir / priming cup.
Lister P/N 201-26480
Lister SR, ST and HR series fuel injector oil seal O ring.
Lister part number 351-51540
Lister ST and HR series fuel injector copper washer.
Lister part number 351-40230
Aluminium cooling fin sleeve for use with 99/235 type injectors fitted to Petter PAZ1 engines.
Genuine Lister Petter part number 208485.
Aluminium cooling fin sleeves for use with 99/208 type injectors fitted to Petter PH engines.
Genuine Lister Petter part number 287267
For later engines using cooling fin sleeve P/N 272376 which is compatible with Bryce injector code 99/320, NSDLA067D0468 or BKB50S5188 with parallel fixing stud positions.
These will not fit the early engines pre serial number 2455 which use Bryce injector code 99/236 Petter P/N 265585 using offset fixing stud positions.
For early engines using cooling fin sleeve P/N 292004 or CB85 which is compatible with Bryce injector code 99/236 Petter P/N 265585 using offset fixing stud positions.
These will not fit the later engines post serial number 2455 which use Bryce injector code 99/320, NSDLA067D0468 or BKB50S5188 with parallel fixing stud positions.
Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400
Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.
Threaded 1/4" BSP 19TPI.