Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11520 These shims are 0.005" thick which is approximately 0.125mm.
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11530 These shims are 0.010" thick which is approximately 0.25mm.
A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to an elbow.
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
High quality cylinder kits for Lister LD engines.
These cylinder kits comprise of:- 1 x Cylinder equivalent to P/N 201-10273 and 1 x Piston assembly equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
High quality piston assemblies for Lister LD engines.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister / Hepolite piston assembly for Lister LD engines on 010" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Good quality piston assembly for Lister LD engines on 030" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Good quality piston assembly for Lister LD engines on 040" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister small end bush for Lister LD and LR engines.
Lister Petter P/N 201-10150
New Lister SL cylinder barrel and piston kits.
Equivalent to Lister part numbers 570-10240 & 201-17520
High quality piston assemblies for Lister SL engines.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-17440 and 1 x Piston ring set equivalent to P/N 570-12130 which combined is equivalent to P/N 570-10240
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister piston assembly for Lister SL engines on 0.020" over size.
These piston assemblies comprise of:- 1 x Piston P/N 201-17440/020 and 1 x Piston ring set P/N 570-12130/020 which combined is P/N 570-10240/020
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine NOS Lister piston assembly for Lister SL engines on 0.040" over size.
These piston assemblies comprise of:- 1 x Piston P/N 201-17440/040 and 1 x Piston ring set P/N 570-12130/040 which combined is P/N 570-10240/040
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister LD, LR, SL and pre 1970 SR inlet and exhaust valve.
Lister Petter part number 201-19360
Lister SL and early SR inlet valve.
Lister Petter part number 201-19350
Lister LD and SL valve collet pair.
This set consists of:-
2 x Lister Petter part number 204-00189 valve collet pairs.
Lister LD and SL valve spring carrier pair.
This set consists of:-
2 x Lister Petter part number 201-10351 valve spring carrier.
Lister LD and SL valve spring pair.
This set consists of:-
2 x Lister Petter part number 291-20641 outer spring
2 x Lister Petter part number 291-20651 inner spring
Replacement 1 gallon / 5 litre fuel tank suitable for Lister LD1, LR1, SL1, SR1 & ST1 engines.
Equivalent to Lister Petter part number 201-11283
Supplied complete with a leak off grommet and tank cap as well as the threaded union on the bottom of the tank.
The cap on the top is a conventional bayonet fitting with a rubber seal.
Approx. dimensions 8" tall x 10" Long x 4.5" wide
A pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1 engines.
These quality aftermarket straps are made to fit our new 1 Gallon tanks on P/N 201-11283, equivalent to 2 x P/N 570-10630.
Sold as a pair, 2 x strap assemblies included.
Lister oil reservoir / priming cup.
Lister P/N 201-26480
Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400
Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.
Threaded 1/4" BSP 19TPI.
Lister LD and SL high pressure injector pipe.
Lister P/N 201-11111
Part No.1 - 99/280
Part No.2 - 5435501
Part No.3 - BKB80SD624
Part No.4 - BKB80SD629
Part No.5 - NSDOB080DO429
High quality Bryce or equivalent injector nozzles suitable for the Lister LD and SL series engines.
Lister Petter P/N 201-01206 or Bryce BDN12SD12
NOZZLE PINTLE
Part No.1 - BDN12SD12
Part No.2 - 0 434 250 027
Part No.3 - DN12SD12
Part No.4 - 5643014
Part No.5 - 093400-1160
Lucas 1/342 fuel pump delivery valve suitable for use in Lister LD and SL fuel pumps with the number FAOABO60A6453.
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister LD, LR and SL engines.
Equivalent to P/N 7032-26A or 1-290
Please check suitability for your pump before purchasing.
New Genuine Lister LD Internal Governor Springs
Lister part number 201-10821
These springs are new old stock and in good condition, supplied in original Lister packaging.
New Genuine Lister LD crankshaft oil seal housing.
Lister part number 201-12890
Lister gear end crankshaft oil seal.
As used on the gear end of Lister LD, LR, SR and ST engines.
Lister Petter part number 201-13190
Lister reduction box oil seal.
As used on the 2:1, 3:1 and 1:1.61 reduction boxes commonly coupled to Lister LD, LR, SR and ST engines.
Lister Petter part number 201-22420
Genuine Lister LD, LR & SL Flywheel Lock Washer
Lister Petter P/N 201-12230