Coin-type tool with flanged hole to adjust the side wire without damaging the centre element and outer rim to measure the electrode gap.
Metric 0.5 - 2.55mm, imperial 0.02 - 0.1". Solid alloy steel.
For installing and removing engine valves on small engines.
Strong carbon steel construction with black-phosphate finish.
Pressure winding handle with 3 x extension bolts.
Includes 5 x open sided adapters: 16, 19, 23, 25 and 30mm, winding T-bar handle, 3 x extension bolts, C-clamp and tough storage case.
Pack of 100 disposable latex or vinyl gloves ideal for workshop use, clear, fine and tough for sensitive protection to oil, greases and all sorts of other nasties.
A sprung steel band Piston Ring Compressor with an all-steel ratchet mechanism. For easy installation of 54 - 127mm diameter pistons into cylinders.
Includes a handy steel adjusting key.
Piston ring pliers manufactured from Nickel-plated carbon steel for corrosion resistance and comfortable vinyl-dipped handles.
Sprung mechanism for fine control.
Installs and removes piston rings up to 6.4mm (1/4") without twisting.
Very simple to use and competitively priced too!
1/2" drive torque wrench manufactured from chrome vanadium steel. Torque range 14-210Nm. Includes 150mm extension bar and a 1/2" to 3/8" converter and comes complete with a strong storage case.
Three piece set of heavy-duty pullers. 75mm, 100mm & 150mm. Reversible for internal or external use.
Disc-type tester with plastic body and rubber bulb. Freeze protection level indicated by 6 x floating coloured discs. Easy-to-read temperature table. For determining levels of ethylene glycol anti-freeze.
- Coloured discs indicate protection level
- Tests coolant levels
- Easy-to-read temperature table
- Sturdy plastic body
- Suitable for use with ethylene glycol anti-freeze
Adjusts to insert and remove both internal & external clips, ideal for fitting and removing the piston in CS engines.
Carbon Steel feeler gauge set with 13 leaves measuring from 0.0mm5 to 1.0mm. Measures 13mmx110mm (1/2"x4.5") when closed. Hardened & polished, individually marked with the applicable sizes.
Heat-treated carbon steel, knurled bodied for controlled grip. Creates clean, accurate holes in gasket material, rubber, leather, plastic and vinyl. Sizes 3, 4, 5, 6, 7 and 8mm.
8 piece parallel pin punch set, 200mm long, Includes 2.4, 3.2, 4, 4.8, 5.6, 6.4, 7.9 & 9.5mm punches.
A two piece set of forged steel nut splitters.
Covers sizes 2-15mm and 15-22mm.
Chrome molybdenum blades.
Remove damaged screws without damaging the surrounding material.
Simply fit the damaged screw remover into a drill, switch to reverse and drill the screw out, the special head design cuts into the screw removing it effortlessly.
- 1 x Screw remover 6.5mm
- 1 x Screw remover 7mm
- 1 x Screw remover 8mm
- 1 x Screw remover 9mm
- 1 x Plastic mould case
- 1 x Screw remover 5mm
Hard wood handle with brass bristles, ideal for the cleaning of spark plugs.
Heavy duty wooden handle 4 row wire brushes with steel wire, just like they used to be made.
Thick bevelled paint & varnish brush, made with pure black bristle with a mix of SRT for improved performance.
Textured black plastic American style handle with stainless steel ferrule.
Thick bevelled paint & varnish brush, made with pure black bristle with a mix of SRT for improved performance.
Textured black plastic American style handle with stainless steel ferrule.
Thick pure bristle paint brush with natural wood beavertail handle and stainless steel ferrule.
Offers outstanding painting performance with both water and oil based coatings.
Super quality thick synthetic bristle paint brush with natural wood beavertail handle and stainless steel ferrule.
Offers outstanding painting performance with both water and oil based coatings.