Replacement ratchet pin, spring and split pin for the Lister CS type of starting handle, How many unusable handles must there be out there because of the lack of this little wonder?
Click here
to subscribe for 'Back-in-stock' notifications
Petter style starting handles suitable for engines using 1.5" crankshaft diameters with a keyway to provide a location point for the ratchet pin housed in the starting handle to engauge with.
Equivalent to Lister Petter part number 193374.
Click here
to subscribe for 'Back-in-stock' notifications
A quality starting handle suitable for use as a replacement for the common Lister 1.5" handle as used on many engine models such as the Lister A, B, Junior, HR, HRW, LD, LR, SL, SR, ST and SW.
This handle type is equipped with a spring loaded ratchet pin which is designed to engauge into the engines output shaft keyway slot. The pin can be reversed to cater for both clockwise and anti clockwise rotation engines. This handle is only suitable for use on engines with a shaft diameter of 1.5" thats machined with a keyway.
Supplied with a turned wooden grip and reversible ratchet pin.
These handles are known to be suitable replacements for the following Lister Petter part numbers 201-12500, 571-10191 and 201-13320
Click here
to subscribe for 'Back-in-stock' notifications
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 601-52010
Fitted with a plastic handle grip.
Click here
to subscribe for 'Back-in-stock' notifications
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 601-52010
Fitted with a wooden handle grip.
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 570-31000
Fitted with a two hand size wooden handle grip.
Good quality reproduction starting handles for use on non standard reverse rotation Lister D and DK engines.
These handles turn / crank anti-clockwise and have a hand grip that spins on the handle shaft for comfort and ease of use.
Equivalent to Lister part number D233C.
Good quality reproduction starting handles for use on standard rotation Lister D and DK engines.
These handles turn / crank clockwise and have a hand grip that spins on the handle shaft for comfort and ease of use.
Equivalent to Lister part number D178C.
Good quality fabricated starting handles for the late style Lister LT engine range which were equipped with anti kick back handles with a 5/8' bore.
This means the handle itself has a hollow bore to take a spigot measuring 5/8" diameter, not that the handle fits into a 5/8" hole.
These are suitable as replacements for the clutch equipped 375232's but are Non Anti Kick Back!
A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 3/4' bore.
This means the handle itself has a hollow bore to take a spigot measuring 3/4" diameter, not that the handle fits into a 3/4" hole.
A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 7/8' bore.
This means the handle itself has a hollow bore to take a spigot measuring 7/8" diameter, not that the handle fits into a 7/8" hole.
Good quality fabricated starting handles for the Petter AA1 and AB1 engines.
Good quality starting handles for Petter PAZ engines.
Manufactured from 7/8" diameter solid steel bar and equipped with a rotary handle grip for comfort and ease of use.
Lister Engine Spares
Lister CS Engine Spares
Petter Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares
Fuel Injection
Water Pumps & Spares
Books & Transfers
Starting Handles (19)
Wolseley Spares (32)
Stuart Turner Spares (8)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Genuine Lister Parts stock
