A very solid water pump designed to fit onto the Indian type of engine with a special adapter plate where the oil dipstick rests. However, it would not be a major operation to fashion together a suitable mounting point or bracket for fitting to an older original Lister CS engine.
A pre-formed nickel plated steel pipe.
Fitted with a Listeroid CS type 14mm banjo fitting for the fuel pump end and a standard male union for the cartridge fuel filter end.
A pre-formed steel, plated pipe with the original Lister CS type large banjo fitting on one end and a smaller 14mm banjo fitting on the other end for use between Bosch Mico fuel pumps and the fuel filter assembly on Listeroid engines.
A gasket for the camshaft end cover on single cylinder Listeroid CS engines.
A single gasket for the camshaft end cover / fuel pump support carting on single cylinder Listeroid CS engines.
A single gasket for the crank case access door on all single cylinder Listeroid CS engines.
A quality copper and non asbestos sandwich type head gasket suitable for use on either 6 or 8 HP Listeroid CS engines fitted with the 7 stud type of cylinder head.
A quality copper and non asbestos sandwich type head gasket suitable for use on either 6 or 8 HP Listeroid CS engines fitted with the 5 stud type of cylinder head.
A quality copper and non asbestos sandwich type head gasket suitable for use on either the 10-1 or the 20-2 Listeroid CS engines.
A quality copper and non asbestos sandwich type head gasket suitable for use on either the 12-1 or the 24-2 Listeroid CS engines.
A genuine Bosch Mico fuel pump equivalent to the Bryce or CAV BPF1B series of pumps.
These have a 10mm element fitted for use on Indian Listeroid single and twin cylinder engines.
A quality fuel filter element for Listeroid engines which use the Indian style of cartridge filter assembly.
Equivalent to Lister part number 010-03008/001
Fits Listeroid bigger bore CS engines such as some 10-1 & 20-2 and most, 12-1 & 24-2 engines. These valves are also the same as the Lister JP, JK and JS inlet valves.
A range of quality gudgeon pins for all sizes of Lister CS engine from 6 to 24 horse power.
Lister CS 10/1 and 20-2 cast iron piston assembly for use in Indian Listeroid engines with a 120mm bore diameter.
Lister CS 12/1 and 24/2 cast iron piston assembly for use in Indian Listeroid engines with a 130mm bore diameter.
High quality piston ring sets for use in Indian made Listeroid engines, they will fit Indian pistons for 10-1 single cylinder engines or 20-2 twin cylinder engines with a 120mm bore diameter.
The set comprises of four compression rings and one oil scraper ring.
Piston ring sets of quality manufacture for use in Indian Listeroid engines they will fit Indian pistons for 12-1 single cylinder engines or 24-2 twin cylinder engines with a 130mm bore diameter.
The set comprises of four compression rings and one oil scraper ring.
Phosphor bronze small end (connecting rod) bush P/N 5-1/D7A or 8-4-7-1.
Suitable for Listeroid CS models 10-1, 12-1, 20-2 & 24-2.
A very high quality centrifugally cast cylinder liner supplied fully machined and with all O ring seals etc.