High quality cylinder kits for Lister LT engines.
These cylinder kits comprise of:- 1 x Cylinder equivalent to P/N 601-30271 and 1 x Piston assembly equivalent to P/N 601-51141
The piston assembly includes the rings, gudgeon pin and circlips.
Equivalent to Lister Petter part number 601-50400
Equivalent to Lister Petter part number 601-50400/020
Equivalent to Lister Petter part number 601-50400/040
Lister Petter part number 601-50400
Lister Petter part number 601-54490
Equivalent to Lister Petter part number 601-54490
Equivalent to Lister Petter part number 601-30321
Equivalent to Lister Petter part number 601-30402
Lister LT1 and LV1 air filter element.
Lister Petter P/N 601-31350
Replaces Belle Mixer Part No. 908/14200
Lister LT1 air filter element P/N 601-42520
For Lister LT1 engines in Benford, Winget and Belle mixers.
Equivalent to the following manufacturer part numbers:-
1082111, 1082111-4, 1082111.4, 10821114, 11172907, 1200A, 1586882-1, 1586882.1, 15868821, 27-091-00, 27.091.00, 2709100, 4881323, 601-4252, 601.4252, 6014252, 60142520, 8152009, 9215, 922592-0001, 922592.0001, 9225920001, BSA4895, CA5146, MD-730, MD.730, MD730
Lister LT2 and LV2 air filter element.
Lister Petter P/N 366-06227
Lister LT2 and LV2 Oil Filter Element.
Lister Petter P/N 601-32950
Lister Petter part number 601-50420
Equivalent to Lister Petter P/N 601-30060
Equivalent to Lister Petter P/N 601-30060/010
Equivalent to Lister Petter P/N 601-30060/020
Equivalent to Lister Petter P/N 601-30060/040
Equivalent to Lister Petter P/N 601-30060/060
This seal is only for early engines equipped with a 3/4" diameter shaft which equates to 19mm.
This seal is only for later engines equipped with a 7/8" diameter shaft which equates to 22mm.
This seal is only for engines equipped with a gear end extension shaft for power take off.
A reconditioned Lister LT series fuel pump.
Bryce P/N FAOAN065P0710
These pumps supersede and can be used in place of pumps with the following Bryce numbers FAOAN065P0578 and FAOAN065P0680
Lister Petter P/N 601-21714 which supersedes P/N 601-21710
These pumps supersede and can be used in place of pumps with the following Bryce numbers FAOAN065E0730 and FAOAN065E0741
Lucas 11/108DC fuel pump element suitable for use in Lister LT and LV fuel pumps.
Lucas 1/338 fuel pump delivery valve suitable for use in Lister LT, LV, LR, SR, ST, HA, HB and HR fuel pumps.
Reconditioned Lister LT & LV Fuel Injector.
Lister Petter P/N 601-56172
Bryce HL140S25C761
New Lister LT & LV Fuel Injector.
Lister Petter P/N 601-56172
Bryce HL140S25C761
Lister LT & LV fuel injector nozzle.
Lister Petter P/N 601-56192, Bryce HL140S25C761
NOZZLE LONG STEM
Part No.1 - HL140S25C761
Part No.2 - VH14040
Part No.3 - 5680446
Lister part number 027-07711
Good quality fabricated starting handles for the late style Lister LT engine range which were equipped with anti kick back handles with a 5/8' bore.
This means the handle itself has a hollow bore to take a spigot measuring 5/8" diameter, not that the handle fits into a 5/8" hole.
These are suitable as replacements for the clutch equipped 375232's but are Non Anti Kick Back!
A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 3/4' bore.
This means the handle itself has a hollow bore to take a spigot measuring 3/4" diameter, not that the handle fits into a 3/4" hole.
A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 7/8' bore.
This means the handle itself has a hollow bore to take a spigot measuring 7/8" diameter, not that the handle fits into a 7/8" hole.
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 570-31000
Fitted with a two hand size wooden handle grip.
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 601-52010
Fitted with a plastic handle grip.
Genuine Lister LV, TS and TR anti clockwise starting handle.
Lister Petter P/N 601-52010
Fitted with a wooden handle grip.