Replacement 1 gallon / 5 litre fuel tank suitable for Lister LD1, LR1, SL1, SR1 & ST1 engines.
Equivalent to Lister Petter part number 201-11283
Supplied complete with a leak off grommet and tank cap as well as the threaded union on the bottom of the tank.
The cap on the top is a conventional bayonet fitting with a rubber seal.
Approx. dimensions 8" tall x 10" Long x 4.5" wide
A pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1 engines.
These quality aftermarket straps are made to fit our new 1 Gallon tanks on P/N 201-11283, equivalent to 2 x P/N 570-10630.
Sold as a pair, 2 x strap assemblies included.
Lister LT2, LV2, ST1 & ST2 Air Filter Element.
Lister P/N 366-062272
Approximate dimensions are 140mm outside diameter, 100mm inside diameter and 60mm tall.
Genuine Lister SR, ST, TS & TR screw on type oil filter element.
Lister Part Number 201-55370
Lister cylinder kits for Lister ST engines.
These cylinder kits comprise of:- 1 x Cylinder P/N 201-80061 and 1 x Piston assembly P/N 570-12840
The piston assembly includes the rings, gudgeon pin and circlips.
A high quality piston assembly for Lister ST and TS engines.
These piston assemblies comprise of:- 1 x Piston with gudgeon pin, cir clips and ring set.
Non genuine Lister STW bare cylinder head.
Equivalent to Lister P/N 570-15840 but without valves and guides which can be supplied seperatly if required.
A set of crankshaft thrust washers suitable for Lister ST engines.
Equivalent to Lister Petter P/N 201-80100
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Cotton over braided rubber petrol and diesel oil tolerant fuel leak off tubing.
This pipe is commonly found on the injector leak off / return lines of many different models of Lister engines.
Equivalent to Lister Petter P/N 202-42480 and 751-18190
3.2mm or 1/8" diameter bore, sold by the linear metre.
Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400
Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.
Threaded 1/4" BSP 19TPI.
Lister oil reservoir / priming cup.
Lister P/N 201-26480
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11520 These shims are 0.005" thick which is approximately 0.125mm.
Lister fuel pump shim for sitting user Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11530 These shims are 0.010" thick which is approximately 0.25mm.
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister ST and STW engines.
Equivalent to P/N 7032-103A, 1-315 or BX66
Please check suitability for your pump before purchasing.
Lister Petter P/N 201-80265
Lister SR, ST and HR series fuel injector oil seal O ring.
Lister part number 351-51540
Lister ST and HR series fuel injector copper washer.
Lister part number 351-40230
Lister gear end crankshaft oil seal.
As used on the gear end of Lister LD, LR, SR and ST engines.
Lister Petter part number 201-13190
Lister reduction box oil seal.
As used on the 2:1, 3:1 and 1:1.61 reduction boxes commonly coupled to Lister LD, LR, SR and ST engines.
Lister Petter part number 201-22420