Lister Petter

New Genuine Lister LD Internal Governor Springs

Lister part number 201-10821

These springs are new old stock and in good condition, supplied in original Lister packaging.

A genuine Lister HL, HR4 & HR6 flywheel end felt crankshaft oil seal.

Lister P/N 354-50360

Lister HRW4, HRW6 and HRWS6 radiator cooled engine alternator belt.

Lister P/N 354-44870

A genuine Lister inlet manifold for reverse rotation SR1 engines.

This manifold sweeps to the left above the exhaust which is not standard spec which was out to the right on P/N 201-51122 but this manifold P/N 570-11290 is for reverse rotation engines and is a slightly different shape.

A genuine Lister ST1 and ST2 fuel pipe.

Lister P/N 366-06746

This pipe is fitted between the fuel tank and the fuel agglomerator on Lister ST1 and ST2 engines.

Petter AB1, AC1 & AD1 Flywheel End Crankshaft Oil Seal.

Lister Petter part number 363686

Aluminium cooling fin sleeve for use with 99/235 type injectors fitted to Petter PAZ1 engines.

Genuine Lister Petter part number 208485.

For early engines using cooling fin sleeve P/N 292004 or CB85 which is compatible with Bryce injector code 99/236 Petter P/N 265585 using offset fixing stud positions.

These will not fit the later engines post serial number 2455 which use Bryce injector code 99/320, NSDLA067D0468 or BKB50S5188 with parallel fixing stud positions.

A genuine Petter PJ1 water inlet manifold.

Petter P/N WCF28

Suitable for single cylinder engines only.

A genuine Petter PJ2 inlet manifold for use when an oil bath air cleaner is fitted.

Petter P/N CF43D

Suitable for twin cylinder engines only.

Genuine Petter PU anti friction collar in original protective packing dating from April / May 1958

Petter part number SFX/D110/9

Packet says 5/8" diameter outside tube. Part consists of a thick brass or bronze washer with a chamfer to the internal diameter on one side.

Genuine Petter PU inlet valve in original protective packing dating from April / May 1958

Petter part number 59856

Genuine Petter PU valve tappet in original protective packing dating from April / May 1958

Petter part number 3-82465

Genuine cylinder kits for Lister LR engines.

These cylinder kits comprise of:- 1 x Cylinder P/N 201-70110 and 1 x Piston assembly P/N 570-11308

The piston assembly includes the rings, gudgeon pin and circlips.

A Petter "A" series rope start pulley guards.

There are three types available.

Petter P/N AAL434 or 298010 is suitable for Petter AA1, AB1 and AC1 series 1 engines - gear end starting in red or green.
Petter P/N AAL434A or 296520 is suitable for Petter AA1, AB1 and AC1 series 1 engines - flywheel end starting in green.

Please select the option required from the menu when ordering.

These are genuine Petter items but older stock so may have signs of long term storage etc but will not affect the operation.

A 5/16" Whitworth grub screw 3/4" long which is the correct size for locking the original 8" diameter A section cast iron V belt pulley with a 3/4" bore onto the crankshaft of the Lister domestic type water pump.

A replacement pawl spring for Petter starting handles.

Petter P/N 251959 which is now superseded by 367820

Genuine Lister LR piston assembly 0.010" over size.

Piston assembly P/N 570-11308/010

The piston assembly includes the rings, gudgeon pin and circlips.