Printable version

No.15 Alligator Style Belt Lacing

 
(6 reviews)  

SKU
15-Joiner
Quantity in stock
295 item(s) available
Weight
0.06 kgs
Our price:
£7.55
including VAT
Quantity (295 available)
Alligator style lacing offers an economical, low-profile belt splice that is hammer applied.
 
Features and Benefits:
  1. One-piece design provides uniform tension across the entire belt width.
  2. Engineered to prevent pieces working loose from the belt.
  3. Hammer-applied; no special installation tools required.
Sold by the length which is approx 235mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
 
This No 15 size is suitable for use with pulleys of 64mm or greater diameter and will work with belting that is 3.2 to 4mm thick. This is the best size for narrow widths of 3 ply belting due to the higher number of teeth per inch of joiner.

Lacing Size

Belt Thickness Range

Recommended Minimum Pulley Diameter

 

Imperial

Metric

Imperial

Metric

15

1/8 - 5/32

3.2 - 4

2, 1/2

64

20

5/32 - 3/16

4.0 - 4.8

3

76

25

3/16 - 7/32

4.8 - 5.6

4

102

27

7/32 - 9/32

5.6 - 7.1

5

125

35

9/32 - 5/16

7.1 - 7.9

7

178

 

No.25 Alligator Style Belt Lacing
£8.04
V Belts, A Profile (12.7x10)
£3.68
HT Lead Terminal
£2.16
1" Wide 3ply 4.5mm Thick Balata Flat Belting
£4.56
No.20 Alligator Style Belt Lacing
£7.80
2" Wide 3ply 4.5mm Thick Balata Flat Belting
£8.82
3" Wide 3ply 4.5mm Thick Balata Flat Belting
£10.75
Lister Spark Plug - Champion D16
£7.92
Lister LT1 Piston Ring Set - All Sizes
£20.40
Average customer rating:
 
(6 reviews)  

Add your own review


5 Most useful customer reviews (see all reviews):
Bob Jolliffe
Feb 11, 2024
This customer purchased the item at our site.
As described, fast delivery.
Loading...Was the above review useful to you? Yes (0) / No (0)
Graham Peterson
Mar 27, 2023
This customer purchased the item at our site.
Easy to use, take care cutting to size as the teeth are very sharp.
Loading...Was the above review useful to you? Yes (0) / No (0)
Ged Whitney
Jan 21, 2022
This customer purchased the item at our site.
I wanted these to replace the belt on my old Lienen lathe, the belt snapped over Christmas and I had belt but no clips… the No15 type is on the minimum limit, so I may end up buying some belt as well.. either way, terrific service for a first order.

Advantages: Quick service/good price.

Disadvantages: No7 would have been better than No15, but these where available at the right price…
Loading...Was the above review useful to you? Yes (0) / No (0)
Ben Elford
Aug 19, 2021
This customer purchased the item at our site.
I found these frustratingly fiddly to fit to a one inch belt, especially with two rows of sharp points under the fingers. After a few tries I managed to make a reliable joint, but would have appreciated some hints and tips.

Advantages: Easily cut to length.

Disadvantages: No instructions or guidance on fitting.
Loading...Was the above review useful to you? Yes (0) / No (0)
Michael Garey
Dec 23, 2020
This customer purchased the item at our site.
Well made product.

Advantages: Easily cut to size

Disadvantages: No instructions or advice on use.
Loading...Was the above review useful to you? Yes (0) / No (0)
Add your own review

Basket is empty

Categories

Reviews

Special

Need help?