Buy Myford Lathe Rich Cream :: Myford Colours :: Machinery Colours :: Paints & Enamels

Myford Lathe Rich Cream

Product Information

The correct shade for the Myford range of lathes which were painted in the distinctive rich cream shade.

A traditional ultra high quality synthetic coach / machinery enamel with high build properties a long wet edge and high solids content for both brush and spray application. Gives an extra long wet edge time allowing the largest of vehicles or fabrications to be brushed or sprayed without overspray or brush drag. Provides ultimate high gloss with build and scratch filling properties combined with excellent water resistance, flexibility and good exterior durability and toughness.

Is used in preference to normal commercially available enamels for decorative work of the highest standard. The quality of the finish allows for longer maintenance intervals to subsequent re-finishing. Ideal for heavy duty vehicle finishing, tractors, stationary engines, marine applications as well as for vehicle repair work. It has a very good resistance to oils, fats, and cutting oils / fluids etc, which makes it an ideal choice for all types of workshop machinery.

Touch dry:- 2 Hours.

Firm dry:- 6 Hours.

Hard dry:- 12 Hours.

Thinners:- Preferably fully synthetic BT8 or white spirits.

Over coating:- Within 30 minutes or after 16 hours.

Film thickness:- 100 microns WFT gives approximately 50 microns DFT.

VOC:- 420g/l

Solids:- Approximately 43 to 55% dependent on colour.

Flashpoint:- Above 32ºC

Specific Gravity:- 0.90 to 1.12 approximately dependent on colour.

Viscosity:- 1.5 - 3.2 poise ICI Cone And Plate.

Temp Resistance:- 180ºC

Storage:- 12 months in original sealed containers.

The colours depicted on the following chart are for guidance only. The displayed colour will depend on your monitor and browser settings. The finished colour, therefore, may not be exactly as shown here.

Suitable thinners are available here.

Details

Product Code EE_MYCream0.5LG

Quantity in stock 189 item(s) available

Weight 1.20 kgs

Colour Code

#FDEA7D

Over 18

You must be over 18 years old or older to purchase this product

Price: £10.98 (€12.30) including VAT £1.83

Options

Tin Size

Finish

Quantity

Myford Lathe Rich Cream

Customers who bought this product also bought

Rate this product

Product rating:	*