Key steel also known as Key Bar or Keysteel is available in a range of Imperial sizes from the drop down menu.
Stocked in self colour these common sizes of Keysteel can be cut to size once purchased from our extensive range of standard 12 Inch lengths.
A quality Tec MY series single phase motor of 0.37kw or 1/2hp suitable for driving the Lister domestic water pump.
These motors have an IP55 ingress protection rating meaning they are protected against water sprayed from any direction.
The MY series aluminium housing single-phase capacitor-run asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard. MY motors offer a high performance level along with safe and reliable low maintenance operation, whilst giving low noise levels and low vibration levels - all within a lightweight and simple construction. These motors are suitable for applications with long term continuous operation such as pumps and fans etc.
A quality Tec MY series single phase motor of 0.75kw or 1hp suitable for driving the Lister domestic water pump.
These motors have an IP55 ingress protection rating meaning they are protected against water sprayed from any direction.
The MY series aluminium housing single-phase capacitor-run asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard. MY motors offer a high performance level along with safe and reliable low maintenance operation, whilst giving low noise levels and low vibration levels - all within a lightweight and simple construction. These motors are suitable for applications with long term continuous operation such as pumps and fans etc.
Key steel also known as Key Bar or Keysteel is available in a range of Metric sizes from the drop down menu.
Stocked in self colour these common sizes of Keysteel can be cut to size once purchased from our extensive range of standard 12 Inch, 304mm lengths.
SPA section V pulleys, Suitable for A Section, SPA section, SPAX section & A section Nutlink, V and wedge belts.
SPA single groove V pulleys manufactured from high quality cast iron.
The option list dimensions are the pitch diameter size of the pulleys.
Z section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example Z19 is 19" long.
Construction and Features
- The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
- The fabric jacket provides grip and protection against external agents and resistance to abrasion.
-
The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.
Standards -
Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.
Dimension - 9.7mm top width x 8mm deep
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
A section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example A20 is 20" long.
Construction and Features
- The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
- The fabric jacket provides grip and protection against external agents and resistance to abrasion.
-
The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.
Standards -
Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.
Dimension - 12.7mm top width x 10mm deep
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
B section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example B26 is 26" long.
Construction and Features
- The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
- The fabric jacket provides grip and protection against external agents and resistance to abrasion.
-
The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.
Standards -
Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.
Dimension - 16.3mm top width x 13mm deep
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
C section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example C40 is 40" long.
Construction and Features
- The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
- The fabric jacket provides grip and protection against external agents and resistance to abrasion.
-
The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.
Standards -
Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.
Dimension - 22mm top width x 18mm deep
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Available in a range of diameters from the drop down menu and sold in 1 metre increments - if you want three metres please select a qty of three and we will supply as a single length.
The correct size replacement V belts for Lister CS 6-1 & 8-1 Start-O-Matic generator sets.
These are a good quality heavy duty B profile / section belts which when ordered in multiples of two come as matched sets.
Sold individually.
High quality heavy duty flat belting joiner lacing strips for belts 3.2 to 4mm thick, sold by the length which is approx 235mm.
These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
SPA section V pulleys, Suitable for A Section, SPA section, SPAX section & A section Nutlink, V and wedge belts.
SPA two groove V pulleys manufactured from high quality cast iron.
The option list dimensions are the pitch diameter size of the pulleys.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
High quality heavy duty flat belting joiner lacing strips for belts 4 to 4.8mm thick, sold by the length which is approx 290mm.
These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
Available in a range of diameters from the drop down menu and sold in 1 metre increments - if you want three metres please select a qty of three and we will supply as a single length.
SPB section V pulleys, Suitable for B Section, SPB section, SPBX section & B section Nutlink, V and wedge belts.
SPB single groove V pulleys manufactured from high quality cast iron.
The option list dimensions are the pitch diameter size of the pulleys.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.
These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.
Temp range: -30 to +80c
SPB section V pulleys, Suitable for B Section, SPB section, SPBX section & B section Nutlink, V and wedge belts.
SPB twin groove V pulleys manufactured from high quality cast iron.
The option list dimensions are the pitch diameter size of the pulleys.