Home / Plastigauge / Plastigauge Packs / Plastigauge PLA To Measure 0.001" - 0.007"

Plastigauge PLA To Measure 0.001" - 0.007"

 
(1 reviews)  

SKU
PLA
Quantity in stock
8 item(s) available
Weight
0.01 kgs
Our price:
£5.46
including VAT
Quantity (8 available)

Plastigauge ® is a precision clearance gauge for the measurement of clearance between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted

The most widely used application of Plastigauge ® is in the measurement of clearance in plain automotive bearings.

Plastigauge ® is also highly effective for measuring the clearance in large bearings which include:-

  • Marine drive shaft bearings
  • Stationary Engine bearings
  • Turbine housing bearings
  • Pump and pressure system bearings

Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.

Plastigauge ® is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.

The red packs (PLA) available are for measuring clearances between 0.025mm - 0.175mm which equates to 0.001' - 0.007" They are supplied in envelopes containing 10 individual gauges.

Should be stored below 35°C

Paragon PT8 Synthetic Thinners
£6.52
lister D, DK, A, AK, B & BK External Governor Spring
£3.12
Whitworth Nuts - All sizes
£0.08
Petter AVA1, AVA2, PH1, PH2 Top Set
£13.98
1" Wide 3ply 4.5mm Thick Balata Flat Belting
£4.20
No.15 Alligator Style Belt Lacing
£7.55
Non Genuine Lister Petter Fuel Filter Assembly - P/N 284359
£28.80
Lister Spark Plug - Champion D16
£6.00
M10 Brass Washer (Lister D Cylinder Head Washers)
£0.42
Average customer rating:
 
(1 reviews)  



1 Most useful customer reviews (see all reviews):
Rod Smith
May 5, 2022
This customer purchased the item at our site.
Plastigauge is ideal for measuring clearances and Stationary Engine Parts seems to be one of few places that sell it in UK. The price here was one of the best. I bought it to measure big end clearance, shell bearing, on a single cylinder motorcycle with close flywheels. I could not have got a metal feeler gauge in.

Advantages: Can measure clearances on curved surfaces
Can measure in tight places.
Very simple to use
Clean to use

Disadvantages: One set doesn’t do all the sizes, a mixed packet would be good
Loading...Was the above review useful to you? Yes (0) / No (0)