Parts Unique To Listeroid Clone Engines

A very solid water pump designed to fit onto the Indian type of engine with a special adapter plate where the oil dipstick rests. However, it would not be a major operation to fashion together a suitable mounting point or bracket for fitting to an older original Lister CS engine.

A very high quality centrifugally cast cylinder liner supplied fully machined and with all O ring seals etc.

High quality piston ring sets for use in Indian made Listeroid engines, they will fit Indian pistons for 10-1 single cylinder engines or 20-2 twin cylinder engines with a 120mm bore diameter.

The set comprises of four compression rings and one oil scraper ring.

Phosphor bronze small end (connecting rod) bush P/N 5-1/D7A or 8-4-7-1.

Suitable for Listeroid CS models 10-1, 12-1, 20-2 & 24-2.

A quality copper and non asbestos sandwich type head gasket suitable for use on either the 10-1 or the 20-2 Listeroid CS engines.

A quality copper and non asbestos sandwich type head gasket suitable for use on either 6 or 8 HP Listeroid CS engines fitted with the 5 stud type of cylinder head.

A valve guide to suit Indian made Listeroid CS engine types.

Equivalent to Lister P/N 010-03083 but modified to be a press fit into the head.
 

A quality fuel filter element for Listeroid engines which use the Indian style of cartridge filter assembly.

A single gasket for the crank case access door on all single cylinder Listeroid CS engines.

A gasket for the camshaft end cover on single cylinder Listeroid CS engines.