Home / Paragon Paint Products / Lacquer & Varnish / Paragon Clear Lacquer

Paragon Clear Lacquer

 
(0 reviews)  

SKU
CEL-0.5L
Quantity in stock
1 item(s) available
Weight
3.00 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
£14.20
including VAT
Tin Size
Finish
Quantity (1 available)
Click here to subscribe for 'Back-in-stock' notifications

A high temperature clear lacquer suitable for a wide range of applications but lends itself very well for use as a final clear coat for those seeking an extra layer of durability to thier paint finish.

Is used in preference to normal commercially available enamels for decorative work of the highest standard. Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:- Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.
Further information:- Data Sheet / MSDS

N.B This product has a slight red / brown colouration when viewed in bulk, this colour is not usually strong enough to have an effect on the base coat colour once applied as the dry film thickness is virtually transparent but a slight colour change may be apparent on very light colours such as whites and creams etc. If you are seeking a clear coat for use with very light coloured base coats we recommend the use of Paragon Ultra Clear Lacquer.

Paragon PT8 Synthetic Thinners
£6.20
Paragon Anti Corrosive Zinc Phosphate Grey Primer
£9.00
Alternative 1 Inch BSP Exhaust Silencer
£16.20
Spark Plug Knurled Terminal Nut M4 Thread
£1.56
Brass Straight Nose Water Drain Tap 1/4BSP
£19.85
Lister Petter Mid Brunswick Green
£14.20
BS381C 541 Maroon
£14.20
BS381C 110 Roundel Blue - Record Vice Blue
£14.20
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!