Home / Paragon Paint Products / Very High Temperature Paints / Paragon Black Stoving Enamel - Semi Gloss

Paragon Black Stoving Enamel - Semi Gloss

 
(0 reviews)  

SKU
PPSE-SG-0.25L
Quantity in stock
71 item(s) available
Weight
1.00 kgs
Painting Advice
Technical Datasheet
Our price:
£11.84
including VAT
Size
Quantity (71 available)
Click here to subscribe for 'Back-in-stock' notifications

Paragon Paints Stoving Enamel is a modified alkyd melamineultra high quality synthetic heat curing enamel finish. 

Is used in preference to normal commercially available enamels for high temperature work of the highest standard.

Ideal for finishing of surfaces exposed to higher than normal operating temperatures such as exhaust and manifolds, ideal for tractors, stationary engines, narrow boats, workshop machinery and marine applications.

  • High build properties.
  • Resistant to up to 240ºC
  • High solids content.
  • Brush or spray application.
  • Provides build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- once stoved at 140ºC for 20 minutes.
Thinners:- Paragon Synthetic PT3
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.

For application to non ferrous metal substrates it is recomended to firstly prime using Paragon single pack VHT black etch primer.

Paragon PT8 Synthetic Thinners
£7.16
Lister D & DK Copper Head Gasket
£17.94
Lister D & DK Gasket Set
£15.90
Golden Film SAE 30 Oil - 5 Litre
£24.66
Golden Film SAE 30 Oil - 1 Litre
£5.95
Paragon Anti Corrosive Red Oxide Primer
£10.40
Lister Petter Mid Brunswick Green
£16.50
Lister Spark Plug - Champion D16
£7.92
Lister D Crankcase Water Drain Tap Adaptor Joint
£1.32
There have been no reviews