A traditional high build, fast drying anti corrosive primer recommended for use as a preparatory coat for our coach and machinery enamel when covering ferrous surfaces, steel and cast iron etc. Contains Zinc Phosphate corrosion inhibiting pigment.
Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.
- High build properties.
- Fast drying.
- Brush or spray application.
- Provides a strong key with good build and scratch filling properties.
- Resistant to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
Touch dry:- 30 minutes, Firm dry:- 2-4 hours @ 20ºC.
Thinners:- PT8.
Over coating:- Primers once touch dry can normally be recoated at any time. There are however a number of factors, such as film thickness, air temperature, air movement etc that can substantially alter the through dry time so we recommend doing a small test patch before over coating a large area.
Film thickness:- 100 microns WFT gives approximately 75 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.
Further information:- Data Sheet / MSDS