A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to an elbow, comes with a large wing nut on the top for easy removal of the top cover to gain access to the filter element.
The filter element is made of a coarse wire wool type material. The filter assembly is held in place by a jubilee clip arrangement which is made to squeeze down onto a round pipe or manifold etc. The body will accept pipes up to 38mm / 1.5" or smaller with suitable packing.
Outer diameter approx 5.5"
Body height 3.25"
Overall height 5.5"
Outer diameter approx 5.5"
Body height 3.25"
Overall height 5.5"
 Nuts - Various Sizes-7bfda72ca78f913322a26246182aa6f9.png)
-3425cb4481b2011d970f25ff78da1230.png)
 Nuts - Various Sizes-be821c643cfacd86f8e413af5f733d52.png)
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares
Fuel Injection
Water Pumps & Spares
Books & Transfers
Starting Handles (17)
Wolseley Engine Spares (32)
Ruston Hornsby Spares (28)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Amanco Engine Spares (11)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (26)
Plastigauge
Clearance Corner (5)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
