A copper washer the correct size and thickness for sealing the injector to the cylinder head of all Lister CS and JP engines.
Brand new, old stock Lister compression change over valve plug copper sealing washer for the CS, JP, JK & JS range of engines.
The Lister part number is 010-03006.
New, old stock Lister compression change over valve plug copper sealing washer for the CS, JP, JK & JS range of engines.
The Lister part number is 010-03091
A good quality die cut water flange gaskets for all Lister CS, JP and Listeroid CS type engines.
Equivalent to Lister P/N 010-02059
A genuine Lister die cut gasket for the top cover of the wick style fuel filter housing as used on Lister CS and JP engines.
Lister P/N 023-02278
Genuine Lister JP and CS injector O ring P/N 010-03038
The early CS and JP engines had a cylinder head arrangement where the water jacket would drain upon removal of the injector from the head. A seal was formed between the head and the injector by this O ring which sat on a shoulder directly under the injector body.
A high quality die cut gasket for the exhaust joint on all Lister CS, J, L and JP engines.
Lister P/N 003-00307 or 010-03057
Genuine Lister JP Rocker Cover Joint P/N 011-03291
A commonly required item on older Lister JP engines in need of a rebuild.
Genuine Lister JP Exhaust Manifold Flange & Expansion Piece Joint P/N 011-03124
This is the joint that sits between the multi section exhaust manifolds and expansion pieces, it is not the gasket that sits between the manifold and the cylinder head.
A quality graphite composite exhaust silencer to manifold gasket for the Lister JP, JK & JS range of engines.
Equivalent to Lister P/N 011-13206
A genuine Lister JK6 rocker cover joint / gasket
Lister P/N 614-00729
Genuine Lister JK6 exhaust manifold to cylinder head gasket joint
Lister P/N 614-00719.
A copper cylinder head shim suitable for Lister 9-1 and JP, JK & JS engines from one to four cylinders.
Equivalent to Lister P/N 010-03179.
A Lister JK6 copper cylinder head shim.
Lister P/N 612-00134.
A copper cylinder head gasket suitable for Lister 9-1 and JP, JK & JS engines from one to four cylinders.
Equivalent to Lister P/N 8-1/C105 or 010-03105.
Made from two layers of copper with a non-asbestos composite core.
These gaskets are 1.25mm or 0.050" thick which is within the range to allow for the correct bump clearance of between 0.045 and 0.050".
A Lister JK6 paper gasket set.
Contents shown in the picture, this is believed to be mostly complete, basically as 657-10821 with the head gaskets and shims removed.
Lister JK6 copper / composite sandwich type cylinder head gaskets.
Equivalent to Lister P/N 612-00132.
British made to the original specification from high quality materials.