Top quality M10 brass washers.
These washers can be used under the brass dome nuts on Lister D engines making them suitable as replacements for Lister P/N S545 of which 5 are fitted to the Lister D cylinder head. Sold individually.
They are a smidgen tight on the 7/16" studs being that they are metric but can be teased on without too much difficulty given a little light filing and are the only practical solution now that imperial brass washers are so scarce.
Quality whitworth bolts commonly found on the crankcase breather of the Lister CS engines and also suitable for the exhaust flange of Lister D engines but could be used for any application requiring this size.
Lister D magneto fixing bolt and washer set. This set comprises of three 3/8" BSW bolts / set screws equivalent to Lister part number S739 and three flat washers equivalent to Lister part number S184
Quality Whitworth studs commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth Stud.
For suitable sized nuts please see the Whitworth nuts section.
Quality Whitworth studs commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth Stud.
For suitable sized nuts please see the Whitworth nuts section.
Lister D carburettor air valve plate screws and spring washer set as used on Lister D carburettors to secure the small brass plate to the underside of the air intake casting.
This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.
A set of three 7/16" Whitworth brass dome nuts as commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth nut.
A flywheel key / Gib key for use on Lister D and DK type engines.
Please choose from the drop down menu the type required. Budget ones are plated, premium ones are self colour and made in the UK.
Lister D cylinder head fixing kit.
This kit contains:-
3 x 7/16" BSW studs 4,1/4" long equivalent to Lister P/N S535
2 x 7/16" BSW studs 5" long equivalent to Lister P/N S529
3 x Brass dome nuts 7/16" BSW equivalent to Lister P/N S708
2 x Zinc plated 7/16" BSW hex nuts
5 x M10 Form A brass washers equivalent to Lister P/N S545
Please note that the brass washers are a smidgen tight on the 7/16" studs being that they are metric. However they can be teased on without too much difficulty given a little light filing and are the only practical solution now that imperial brass washers are so scarce.
Gib key pullers suitable for use on all Lister A, B & D engine types with a 1.5" diameter crankshaft.
Manufactured for Stationary Engine Parts Ltd to our own original concept and design. They are suitable for both spoked flywheels and solid types on all engines with a 1.5" diameter crankshaft.
We have upgraded the MkII puller from 12mm steel plate to 18mm bar stock to enable you to put some serious removal pressure on that key via the three large bolts. We are not promising this is the answer to all your stuck key problems but it should certainly give you a real fighting chance.