Lister CS Single Cylinder Oil Filter Kit

(1 reviews)  

Quantity in stock
19 item(s) available
1.70 kgs
Our price:
including VAT
Quantity (19 available)
Click here to subscribe for 'Back-in-stock' notifications

An inline oil filter kit supplied with a screw on oil filter to enable you to have fully filtered oil after the oil pump on your Lister CS or Listeroid single cylinder engine.

Simply remove your existing single steel / copper pipe and replace it with this new kit of parts. Not suitable for radiator cooled engines as the drive pulley to the radiator fan will prevent sufficient clearance to fit the filter kit.

Spare filter cartridges are also available separately from the drop down menu for this product. Please note that there are two types of filter cartridge available and the two are not universally interchangeable.

Early supplies of these kits were supplied with a Lister Petter filter element P/N 201-55370 which uses a 3/4” thread.

Current supplies of these kits are supplied with a Bosch F002H20264 element which uses a M20 x 1.5mm thread.

If you are ordering a replacement cartridge for an existing filter kit please ensure the correct one is selected as they are not interchangeable.

Lister CS Instruction Book / Workshop Manual
Lister Governor Hook
Lister CS & JP Valves - P/N 010-03121
Lister CS & JP Copper Injector Seal P/N 010-03041
Lister CS, VA & JP Valve Guide, Inlet
Plastigauge PLA To Measure 0.001" - 0.007"
Lucas RS1 & SR1 Magneto Replacement Condenser
Lister CS Paper Bearing Shim
Lister CS 5-1, 6-1 & 8-1 Overhaul Gasket Set
Average customer rating:
(1 reviews)  

1 Most useful customer reviews (see all reviews):
Jack wills
Dec 4, 2019
This customer purchased the item at our site.
While this is an effective filter, the pipes will have to be re-bent a bit to properly fit. I forced the first installation and eventually the delivery side pipe cracked at the engine fitting. SEP was able to send a new set of pipes quickly. Save your original parts to re-fit if you have a cracked pipe.

As a result of this helpful feedback these kits have now been revised to have soft copper pipes so that final fitment / adjustment is much easier.

Advantages: helps to keep oil far cleaner than just the original sump intake screen. Replacement filters are inexpensive and readily available.

Disadvantages: Difficult access behind flywheel for mounting and filter replacement.
Loading...Was the above review useful to you? Yes (2) / No (0)