Home / Clearance Corner / CLEARANCE Boxford Lathe Olive Beige 0.5L Gloss

CLEARANCE Boxford Lathe Olive Beige 0.5L Gloss

(0 reviews)  

Boxford Lathe Olive Beige Cleara
Quantity in stock
1 item(s) available
3.00 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
including VAT
Tin Size
Quantity (1 available)
Click here to subscribe for 'Back-in-stock' notifications

A superior high temperature machinery enamel the correct shade for the Boxford MkIII 1978 to 1982 range of lathes which were painted in the two tone colour scheme of brown on the base and olive beige on the top.

Is used in preference to normal commercially available enamels for decorative work of the highest standard.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:-  Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.
Further information:-  Data Sheet  /  MSDS

Key Steels
B Section Brammer Type Link Belting
RAL 5005 Signal Blue
BS2660 5-059 Sky
Ruston Hornsby 9PB 4.5HP Head Gasket
M12 Brass Washers
Petter M type 1.5 HP Copper Head Gasket
Lister LD Piston Assembly 0.020" Over Size
Enfield HO2 Model 185 Bryce Fuel Pump FAOAB065A6365
There have been no reviews