Thick bevelled paint & varnish brush, made with pure black bristle with a mix of SRT for improved performance.
Textured black plastic American style handle with stainless steel ferrule.
Coin-type tool with flanged hole to adjust the side wire without damaging the centre element and outer rim to measure the electrode gap.
Metric 0.5 - 2.55mm, imperial 0.02 - 0.1". Solid alloy steel.
Thick pure bristle paint brush with natural wood beavertail handle and stainless steel ferrule.
Offers outstanding painting performance with both water and oil based coatings.
Circlip Pliers Set 5pce
- Chrome vanadium steel construction
- For insertion & removal of both internal & external circlips
- 1 x handle with 4 x interchangeable heads
Remove damaged screws without damaging the surrounding material.
Simply fit the damaged screw remover into a drill, switch to reverse and drill the screw out, the special head design cuts into the screw removing it effortlessly.
- 1 x Screw remover 6.5mm
- 1 x Screw remover 7mm
- 1 x Screw remover 8mm
- 1 x Screw remover 9mm
- 1 x Plastic mould case
- 1 x Screw remover 5mm
5pce set of Silverline brand eazi out type extractors for removing sheared screws & bolts. Produced from GCr15 bearing steel and is suitable for 3-18mm removal.
Carbon Steel feeler gauge set with 13 leaves measuring from 0.0mm5 to 1.0mm. Measures 13mmx110mm (1/2"x4.5") when closed. Hardened & polished, individually marked with the applicable sizes.
Funnily enough a set of four solvent resistant plastic funnels, ideal for general workshop use.
Heat-treated carbon steel, knurled bodied for controlled grip. Creates clean, accurate holes in gasket material, rubber, leather, plastic and vinyl. Sizes 3, 4, 5, 6, 7 and 8mm.
Multitec 2 in 1 reversible screw driver.
A quality reversible screwdriver with a 355mm total length, equipped with slotted blade on one end and Phillips on the other end.
The insulated blade section is detachable from the handle and can be reversed by a positive locking system into the handle to swap between blade types.
A two piece set of forged steel nut splitters.
Covers sizes 2-15mm and 15-22mm.
Chrome molybdenum blades.
Pin Punch Set 8pce
- Hardened & tempered steel
- Knurled handles for control & grip
- Enables removal of rivets & pins
- 8 piece parallel pin punch set, 200mm long
- Includes 2.4, 3.2, 4, 4.8, 5.6, 6.4, 7.9 & 9.5mm punches.
Very simple to use and competitively priced too!
Thick bevelled paint & varnish brush, made with pure black bristle with a mix of SRT for improved performance.
Textured black plastic American style handle with stainless steel ferrule.
Silverline 1/4in-7/8in AF Combination Spanner Set 11pc 638315
The Silverline 1/4in-7/8in AF Combination Spanner Set 11pc 638315 is an ideal set for all trade professionals and DIYers. These spanners have open bi-hexagonal ends with 15° offset for greater access. They have been desigend to be durable and robust with a hardened, tempered, drop forged chrome vanadium cosntruction. The high-quality fully polished finish gives them a professional look that is long lasting. Included in this set is a 1/4" spanner, 5/16" spanner, 3/8" spanner, 7/16" spanner, 1/2" spanner, 9/16" spanner, 5/8" spanner, 11/16"spanner, 3/4" spanner, 13/16" spanner and a 7/8" spanner all supplied in a ultra-strong ballistic nylon storage roll for convenience.
Features and Benefits:
- Supplied in an Ultra-strong ballistic nylon storage roll
- 15° offset for greater access
- Hardened, tempered drop-forged chrome vanadium construction
Technical Specification:
Sizes - 1/4", 5/16", 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 13/16” and 7/8”Material - Hardened and tempered, drop-forged chrome vanadium
Offset - 15°
Supplied With:
1 x ¼”Spanner1 x 5/16”Spanner
1 x 3/8”Spanner
1 x 7/16” Spanner
1 x ½”Spanner
1 x 9/16” Spanner
1 x 5/8” Spanner
1 x 11/16” Spanner
1 x ¾” Spanner
1 x 13/16” Spanner
1 x 7/8” Spanner
1 x Nylon Storage Roll
Hard wood handle with brass bristles, ideal for the cleaning of spark plugs.
A superb value suction feed spray gun with a dual action two stage trigger, adjustable spray pattern and external mix nozzle. Comes complete with a 750CC pot capacity, 1.5 mm nozzle, 1/4" quick connect air hose fitting. Average air consumption 5CFM.
A beautiful quality 6" drop forged adjustable spanner.
Graduated scale on the jaws for quick size reference.
Three piece set of heavy-duty pullers. 75mm, 100mm & 150mm. Reversible for internal or external use.
1/2" drive torque wrench manufactured from chrome vanadium steel. Torque range 14-210Nm. Includes 150mm extension bar and a 1/2" to 3/8" converter and comes complete with a strong storage case.
For installing and removing engine valves on small engines.
Strong carbon steel construction with black-phosphate finish.
Pressure winding handle with 3 x extension bolts.
Includes 5 x open sided adapters: 16, 19, 23, 25 and 30mm, winding T-bar handle, 3 x extension bolts, C-clamp and tough storage case.
Heavy duty wooden handle 4 row wire brushes with steel wire, just like they used to be made.