Starting Handles

A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 3/4' bore.

This means the handle itself has a hollow bore to take a spigot measuring 3/4" diameter, not that the handle fits into a 3/4" hole.

Lister LV1, LV2 and TS1 anti clockwise short grip starting handle.

Lister Petter P/N 601-52010

Fitted with a one hand size wooden handle grip.

Good quality fabricated starting handles for the Petter AA1 and AB1 engines.

Good quality fabricated starting handles for Petter AC2 engines.

A replacement pawl spring for Petter starting handles.

Petter P/N 251959 which is now superseded by 367820

A quality starting handle suitable for use as a replacement for the common Lister 1.5" handle as used on many engine models such as the Lister A, B, Junior, HR, HRW, LD, LR, SL, SR, ST and SW.

This handle type is equipped with a spring loaded ratchet pin which is designed to engauge into the engines output shaft keyway slot. The pin can be reversed to cater for both clockwise and anti clockwise rotation engines. This handle is only suitable for use on engines with a shaft diameter of 1.5" thats machined with a keyway.

Supplied with a turned wooden grip and reversible ratchet pin.

These handles are known to be suitable replacements for the following Lister Petter part numbers 201-12500, 571-10191 and 201-13320

A replacement ratchet pin, spring and split pin for the Lister CS type of starting handle.

A good quality fabricated starting handle for the Lister LT engine range which require a handle with a 7/8' bore.

This means the handle itself has a hollow bore to take a spigot measuring 7/8" diameter, not that the handle fits into a 7/8" hole.

Petter style starting handles suitable for engines using 1.5" crankshaft diameters with a keyway to provide a location point for the ratchet pin housed in the starting handle to engage with.

Equivalent to Petter part number 193374.