- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The white packs (PLX) we supply are for measuring clearances between 0.018mm-0.045mm.
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The Black packs (PLE) we supply are for measuring clearances between 0.030″ to 0.070″ (0.75mm – 1.75mm).
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The Brown packs (PLD) we supply are for measuring clearances between 0.020″ to 0.040″ (0.500mm – 1.00mm).
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The green packs (PLC) we supply are for measuring clearances between 0.175mm - 0.50mm which equates to 0.007' - 0.020"
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The blue packs (PLB) we supply are for measuring clearances between 0.004" to 0.010"
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The red packs (PLA) we supply are for measuring clearances between 0.025mm - 0.175mm which equates to 0.001' - 0.007"
Should be stored below 35°C
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
