Brass Stauffer style greasers for use on Lister CS and D rocker shafts.
The male thread is 1/8" BSP and can be used on any other engine requiring a grease cup with this size fitting but is known to be suitable for the rocker shafts on Lister CS diesel and Lister D petrol engines.
A pair of hardened valve caps suitable for use on Lister D engines. Carefully machined to be an exact replica of the originals including the slot to accommodate the valve stem carrier pin. The top surface may look a little rough in the picture but it is just the light on the picture, the surface is actually nicely ground to original Lister spec.
Ideal for use with our valves, guides and springs.
A quality Lister D replacement valve manufactured to original specification with a slotted stem to accept the carrier pin.
Click here
to subscribe for 'Back-in-stock' notifications
Click here
to subscribe for 'Back-in-stock' notifications
A genuine Lister flat top piston P/N 1/1290, gudgeon pin and ring set for Lister DK type engines on +0.040" oversize.
Supplied complete with four rings, three compression rings for 3" +0.040" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
These TVO pistons also fit Wolseley WD1 and WD2 engines without the requirement of any modification. They will also fit Wolseley WD8 engines if the small end bush is reduced from 11/16" to 5/8" diameter.
A genuine Lister flat top piston P/N 1/1290, gudgeon pin and ring set for Lister DK type engines.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
These TVO pistons also fit Wolseley WD1 and WD2 engines without the requirement of any modification. They will also fit Wolseley WD8 engines if the small end bush is reduced from 11/16" to 5/8" diameter.
Genuine Lister domed top pistons P/N 1/1289 complete with rings for Lister D type engines.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
All the parts which would be required for a complete overhaul of both the valves on your Lister D engine.
These items are available seperatly but if you require all the items buying them together in one go represents a discount of 10% saving you £10.15 on the regular price!
Click here
to subscribe for 'Back-in-stock' notifications
Genuine Lister domed top pistons P/N 1/1289 complete with rings for Lister D type engines, 0.020" Oversize.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
Genuine Lister domed top pistons P/N 1/1289 complete with rings for Lister D type engines, 0.030" Oversize.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
Genuine Lister domed top pistons P/N 1/1289 complete with rings for Lister D type engines, 0.040" Oversize.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
Genuine Lister domed top pistons P/N 1/1289 complete with rings for Lister D type engines, 0.060" Oversize.
Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.