Quality small end bush bearings for the well known Petter AV, AVA, PH and PJ Diesel engines.
Please select the right bush for your engine from the drop down list.
You will need to purchase one bush per small end, i.e two bushes for a twin cylinder engine.
The safest way to ascertain which bush is required is to press out the old bush and find the part number which is generally stamped into the bush's outside diameter. Failing that if no part number is present the dimensions of each bush are listed below:-
P/N JC16 or 205858 measures OD = 1.420" ID = 1.160 Length = 1.2"
P/N HJC16 or 258702 measures OD = 1.420" ID = 1.185" Length = 1.2" (For early 90' end cap con rods)
P/N 330739 or 332596 measures OD = 1.3175" ID = 1.185" Length = 1.2" (For later angled con rods)
P/N 330739 or 332596 measures OD = 1.3175" ID = 1.185" Length = 1.2" (For later angled con rods)
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books, Transfers & Posters
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (30)
Plastigauge
Clearance Corner (2)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
