Alligator style lacing offers an economical, low-profile belt splice that is hammer applied.
Features and Benefits:
- One-piece design provides uniform tension across the entire belt width.
- Engineered to prevent pieces working loose from the belt.
- Hammer-applied; no special installation tools required.
Sold by the length which is approx 290mm.
These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
This No 25 size is suitable for use with pulleys of 102mm or greater diameter and will work with belting that is 4.8 to 5.6mm thick. This is the best size for 4 ply belting.
|
Lacing Size |
Belt Thickness Range |
Recommended Minimum Pulley Diameter |
||
|
|
Imperial |
Metric |
Imperial |
Metric |
|
15 |
1/8 - 5/32 |
3.2 - 4 |
2, 1/2 |
64 |
|
20 |
5/32 - 3/16 |
4.0 - 4.8 |
3 |
76 |
|
25 |
3/16 - 7/32 |
4.8 - 5.6 |
4 |
102 |
|
27 |
7/32 - 9/32 |
5.6 - 7.1 |
5 |
125 |
|
35 |
9/32 - 5/16 |
7.1 - 7.9 |
7 |
178 |
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (21)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (31)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (14)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (4)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
