An anti clockwise starter motor suitable for clockwise rotation Lister Petter applications.
Equivalent to:-
P/N 274898 for Petter PH & PC engines.
P/N 204-13273 for Lister SR2, ST1, ST2 and ST3 engines.
Lister fuel pump shims for Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.
Fits the following applications and more:-
Lister LD, LR, SL, SR, ST, HR
Lister P/N 201-11520, 201-11530 & 201-11540
Available in a range of different thicknesses, please select accordingly from the options menu.
A clockwise starter motor suitable for anti clockwise rotation Lister Petter applications.
Equivalent to:-
P/N 274899 for Petter PH & PC engines.
P/N 204-13270 or 204-13275 for Lister SR4, ST1, ST2 and ST3 engines.
Genuine Lister SR, ST, TS & TR screw on type oil filter element.
Lister Part Number 201-55370
Cotton over braided rubber petrol and diesel oil tolerant fuel leak off tubing.
This pipe is commonly found on the injector leak off / return lines of many different models of Lister engines.
Equivalent to Lister Petter P/N 202-42480 and 751-18190
3.2mm or 1/8" diameter bore, sold by the linear metre.
As used on Lister LD, LR, SL and SR engines to mount filter assembly on P/N 201-11613, 201-11614 or 201-11615.
Lister gear end crankshaft oil seal.
As used on the gear end of Lister LD, LR, SR and ST engines.
Lister Petter part number 201-13190
A high quality cast iron starting handle suitable for Lister LD, LR, SL, SR, ST and HR engines requiring a 1.5" diameter starting handle.
Equipped with a sprung loaded ratchet pin that engages with the crankshafts key way.
Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW.
Equivalent to Lister P/N 201-12510.
Replacement 1 gallon / 5 litre fuel tank suitable for Lister LD1, LR1, SL1, SR1 & ST1 engines.
Equivalent to Lister Petter part number 201-11283
Supplied complete with a leak off grommet and tank cap as well as the threaded union on the bottom of the tank.
The cap on the top is a conventional bayonet fitting with a rubber seal.
Approx. dimensions 8" tall x 10" Long x 4.5" wide
A pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1 engines.
These quality aftermarket straps are made to fit our new 1 Gallon tanks on P/N 201-11283, equivalent to 2 x P/N 570-10630.
Sold as a pair, 2 x strap assemblies included.
A genuine Lister fuel tank support block suitable for Lister LD2, LR2, SL2 & SL3, SR2 & SR3 and ST1 & ST2 engines.
Lister Petter part number 202-11490
Lister LT2, LV2, ST1 & ST2 Air Filter Element.
Lister P/N 366-062272
Approximate dimensions are 140mm outside diameter, 100mm inside diameter and 60mm tall.
Lister oil reservoir / priming cup.
Lister P/N 201-26480
Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.
Lister reduction box oil seal.
As used on the 2:1, 3:1 and 1:1.61 reduction boxes commonly coupled to Lister LD, LR, SR and ST engines.
Lister Petter part number 201-22420
A genuine Lister SL3, SR3 & ST3 engine crankshaft pinion.
Lister P/N 203-11140
New, older stock that has been carefully stored.
Lister SR, ST and HR series fuel injector oil seal O ring.
Lister part number 351-51540
Lister ST and HR series fuel injector copper washer.
Lister part number 351-40230
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister ST and STW engines.
Equivalent to P/N 7032-103A, 1-315 or BX66
Please check suitability for your pump before purchasing.
A high quality piston assembly for Lister ST and TS engines.
These piston assemblies comprise of:- 1 x Piston with gudgeon pin, cir clips and ring set.
Quality cylinder kits for Lister ST engines.
These cylinder kits comprise of:- 1 x Cylinder P/N 201-80061 and 1 x Piston assembly P/N 570-12840
The piston assembly includes the rings, gudgeon pin and circlips.
Lister Petter P/N 201-80265
A set of crankshaft thrust washers suitable for Lister ST engines.
Equivalent to Lister Petter P/N 201-80100
A genuine Lister ST3 fuel pipe.
Lister P/N 203-82880
Non genuine Lister STW bare cylinder head.
Equivalent to Lister P/N 570-15840 but without valves and guides which can be supplied seperatly if required.
Lister Petter part number 201-90463. Delphi NSDLB046D0483 Bryce 99/436 or 99/500S fitted with Delphi HL140S25D881P2 nozzle or equivalent.
Lister Petter part number 201-48530 which supersedes part numbers 201-47042 & 202-36730. Delphi LRB6705502 fitted with Delphi 6801176 nozzle or equivalent.
Lister Petter part number 201-48530 which supersedes part numbers 201-47042 & 202-36730. Delphi LRB6705502 fitted with Delphi 6801176 nozzle or equivalent.
A good quality 1/4" BSP swivel union plug / banjo bolt.
Equivalent to Petter P/N 831026
Suitable for use on the fuel filter assembly 284359 as commonly used on Petter AV, AVA, PH, PHW and Lister LD, SL, SR, ST engines etc.
Plated for corrosion resistance.
Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400
Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.
Threaded 1/4" BSP 19TPI.