Lister CS Oil Filter Kit

(1 reviews)  

Quantity in stock
15 item(s) available
1.70 kgs
Our price:
including VAT
Quantity (15 available)
Click here to subscribe for 'Back-in-stock' notifications

An inline oil filter kit supplied with a screw on oil filter to enable you to have fully filtered oil after the oil pump on your Lister CS or Listeroid engine.

Simply remove your existing single steel / copper pipe and replace it with this new kit of parts. Not suitable for radiator cooled engines as the drive pulley to the radiator fan will prevent sufficient clearance to fit the filter kit.

Spare filter cartridges are also available separately from the drop down menu for this product. Please note that there are two types of filter cartridge available and thw two are not universally interchangeable.

Early supplies of these kits were supplied with a Lister Petter filter element P/N 201-55370 which uses a 3/4” thread.

Current supplies of these kits are supplied with a Bosch F002H20264 element which uses a M20 x 1.5mm thread.

If you are ordering a replacement cartridge for an existing filter kit please ensure the correct one is selected as they are not interchangeable.

Lister CS Instruction Book / Workshop Manual
Whitworth Stud 3/8 x 1,1/2 Lister CS inlet & Exhaust Manifold
Lister CS Fuel Line Dowty Seals
Lister CS & JP Copper Injector Seal
Lister CS Pepper Pot Exhaust Silencer
Lister CS Big End Bolt Split Pin Pair
Lister CS Single Cylinder Overhaul Gasket Set
Piston Ring Compressor 54-127mm
Average customer rating:
(1 reviews)  

1 Most useful customer reviews (see all reviews):
Jack wills
Dec 4, 2019
This customer purchased the item at our site.
While this is an effective filter, the pipes will have to be re-bent a bit to properly fit. I forced the first installation and eventually the delivery side pipe cracked at the engine fitting. SEP was able to send a new set of pipes quickly. Save your original parts to re-fit if you have a cracked pipe.

As a result of this helpful feedback these kits have now been revised to have soft copper pipes so that final fitment / adjustment is much easier.

Advantages: helps to keep oil far cleaner than just the original sump intake screen. Replacement filters are inexpensive and readily available.

Disadvantages: Difficult access behind flywheel for mounting and filter replacement.
Loading...Was the above review useful to you? Yes (1) / No (0)