Lister A Piston Ring Set - Late Style 4" Bore

Quality replacement piston ring sets suitable for Lister A type engines with 4" diameter cylinder bore's.

 

This set comprises of:-

 

3 x 1/8" wide compression rings equivalent to Lister P/N A104-16

1 x 3/16" wide oil scraper ring equivalent to Lister P/N A104-17

 

All four rings are supplied with radial depths of 0.138" to 0.145"

 

Some customers have reported their engine having a 3.75" bore and only being equipped with a three ring piston. Thanks to David Edgingtons "Engine Torque" No 218 as published in Kelsey's Stationary Engine Magazine we can confirm that the Lister A type engine received a bore diameter increase from 3.75" to 4" in November 1932 at engine No 222546. Almost from the outset more power was required from the A type engine for driving generator sets, so by April 1927 the first speed increase (to 3hp) had been introduced to specification A56E.

 

As regards to the oil scraper ring, this was added to the 3.75" piston at engine No 48684 (A14) and 48751 (A54), and of course was continued when the 4" bore was introduced. The Lister A & B type oil scraper ring was introduced (according to a note in a build book) initially to curtail oil consumption in the early paraffin engines.