Lister D and DK type composite head gasket die cut in the UK from a superior performance universal compressed sheet material based on a blend of aramid / inorganic fibres and special additives, with high quality
nitrile rubber binder system.
Superb quality Lister D and DK type copper head gasket made to exceed the original specification by the use of a superior non asbestos inner material with a rubber binder.
A full gasket set consisting of every paper gasket needed for a complete rebuild of Lister D and DK type engines.
Also includes the water drain bung adapter fibre washer, fuel tap to tank fibre washer and the two fibre washers for the carburettor float chamber.
This set does not include the copper head gasket which is available to purchase separately.
Lister D inlet & exhaust manifold gasket pair.
Die cut from high temperature asbestos free gasket material.
Lister DK Petrol/Parrafin vaporiser gasket. Die cut from high temperature stainless steel foil reinforced graphite gasket material.
Genuine AMAL float chamber washer as used on Lister D engines.
Lister Part number 14-175
This washer sits at the base of the float chamber and creates a seal between the bottom of the float bowl and the fuel inlet union.
Not to be confused with the washers which sit either side of the banjo fitting / swivel union connecting the float chamber to the carburettor intake.
Genuine AMAL float chamber lower banjo / swivel union bottom washer as used on Lister D engines.
Lister Part number 4-053 or 5197. Sold individually
This washer sits under the float chamber banjo / swivel union fitting to create the lower seal.
This is the upper sealing washer of the float chamber banjo / swivel union on Lister D engines.
Lister Part number D320. Sold individually
This washer sits on the top side the float chamber banjo / swivel union fitting to create the upper seal to the jet P/N 1/780.
This is the sealing washer that sits between the under side of the fuel tank and the fuel strainer on Lister D engines.
Lister Part number 12406. Sold individually.
This is the sealing washer that sits between the crankcase water jacket and the water drain tap adaptor on Lister D engines.
Lister Part number 3306. Sold individually.