Paragon Black Stoving Enamel - Gloss

Paragon Paints Stoving Enamel is a modified alkyd melamineultra high quality synthetic heat curing enamel finish. 

Is used in preference to normal commercially available enamels for high temperature work of the highest standard.

Ideal for finishing of surfaces exposed to higher than normal operating temperatures such as exhaust and manifolds, ideal for tractors, stationary engines, narrow boats, workshop machinery and marine applications.

• High build properties.
• Resistant to up to 240ºC
• High solids content.
• Brush or spray application.
• Provides ultimate high gloss with good build and scratch filling properties.
• Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
• Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- once stoved at 140ºC for 20 minutes.
Thinners:- Paragon Synthetic PT3
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.

For application to non ferrous metal substrates it is recomended to firstly prime using Paragon single pack VHT black etch primer.