Fuel & Water

Products

Brass Fuel Filter Mesh
 
(10 reviews)  
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburetor float chambers.
£3.98
including VAT

Lister D AMAL Float Chamber Lower Banjo Washer P/N 4-053 or 5197
 
(1 reviews)  

Genuine AMAL float chamber lower banjo / swivel union bottom washer as used on Lister D engines.

Lister Part number 4-053 or 5197. Sold individually 

This washer sits under the float chamber banjo / swivel union fitting to create the lower seal.

£0.73
including VAT
Qty
Lister D Copper Fuel Pipe (tank to carb)
 
(2 reviews)  

A high quality Lister D copper fuel pipe with unions to run from the tanks fuel tap to the connection on the bottom of the carburettor float chamber.

£14.40
including VAT
Qty
Lister D Brass Fuel Cock & Tank Filter Assembly
 
(1 reviews)  

Newly manufactured brass fuel taps and tank filter assemblies suitable for the Lister D stationary engines.

Equivalent to Lister P/N's D330, 12406, 1/1013C & 3197

The body of the tap incorporates 1/4" BSP threads, male - female and the tank filter is 1/2" BSP. The filter is covered with brass gauze soldered into place.

£31.20
including VAT
Qty
Lister D AMAL Float Chamber Washer P/N 14-175
 
(1 reviews)  

Genuine AMAL float chamber washer as used on Lister D engines.

Lister Part number 14-175

This washer sits at the base of the float chamber and creates a seal between the bottom of the float bowl and the fuel inlet union.

Not to be confused with the washers which sit either side of the banjo fitting / swivel union connecting the float chamber to the carburettor intake.

£0.60
including VAT
Qty
Lister D Carburettor Air Valve Spring
 
(0 reviews)  

British made Lister D carburetor air valve springs.

Equivelent to Lister part number D100 or 004-00100

£5.04
including VAT
Qty
Machined Brass Bent Nose Water Drain Tap
 
(0 reviews)  

Excellent quality brass water drain tap for the Lister D type engine as well as many other engines. A difficult part to find these days!

The body of the tap incorporates a male 1/4" BSP thread.

£21.60
including VAT
Qty
Lister D Carburettor Air Valve Spring Adjuster Lock Nut
 
(0 reviews)  

British made Lister D carburetor air valve spring adjuster lock nuts.

Equivelent to Lister part number S583.

Sold individually.

Manufactured from quality brass.

£1.48
including VAT
Qty
Lister D Carburettor Air Valve Plate Screws & Spring Washers
 
(0 reviews)  

Lister D carburettor air valve plate screws and spring washer set as used on Lister D carburettors to secure the small brass plate to the underside of the air intake casting.

This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.

£3.00
including VAT
Qty
Lister D AMAL Carburetor Float Kit P/N RKC-525
 
(0 reviews)  

Genuine AMAL carburetor float kit as used on Lister D engines.

Lister Part number RKC-525

Includes, float, float needle and retaining clip.

£26.70
including VAT
Qty
Cast Brass Bent Nose Water Drain Tap 1/4BSP
 
(0 reviews)  

Excellent quality brass water drain taps suitable for a wide range of stationary engines. A difficult part to find these days!

The body of the tap incorporates a male 1/4" BSP thread.

£19.85
including VAT
Qty
Lister D Carburettor Air Valve P/N D109
 
(0 reviews)  

Replacement Lister D carburetor air valves.

Equivelent to Lister part number D109 or 004-00109

£15.00
including VAT
Qty
Lister D AMAL Carburetor Float Needle Retaining Clip P/N 4-230
 
(2 reviews)  

Genuine AMAL carburetor float needle retaining clip as used on Lister D engines.

Lister Part number 4-230

£2.44
including VAT
Qty
Lister D AMAL Float Chamber Nut P/N 14-178
 
(0 reviews)  

Genuine AMAL float chamber nut as used on Lister D engines.

Lister Part number 14-178

£2.54
including VAT
Qty
Lister D AMAL Float Chamber Cover Assembly P/N 14-208A
 
(0 reviews)  

Genuine AMAL float chamber cover assembly as used on Lister D engines.

Lister Part number 14-208A

Includes the tickler, tickler spring, tickler locking collar, tickler split pin and locking screw.

£28.80
including VAT
Qty
Lister D AMAL Carburetor Float Needle P/N 14-024
 
(1 reviews)  

Genuine AMAL carburetor float needle as used on Lister D engines.

Lister Part number 14-024

£12.00
including VAT
Qty
Lister D Carburettor Air Valve Adjuster P/N A189
 
(0 reviews)  

British made Lister D carburetor air valve adjuster.

Equivelent to Lister part number A189.

Sold individually.

Manufactured from quality brass.

£12.60
including VAT
Qty
Lister D AMAL Carburetor Float Chamber Assembly
 
(0 reviews)  

Genuine AMAL carburetor float chamber assembly as used on Lister D engines.

Lister Part number 1A

Includes the float, float needle, float retaining clip, top cover with tickler and bottom inlet union.

£102.65
including VAT
Qty
Lister D AMAL Float Chamber Upper Banjo Washer P/N D320
 
(0 reviews)  

This is the upper sealing washer of the float chamber banjo / swivel union on Lister D engines.

Lister Part number D320. Sold individually 

This washer sits on the top side the float chamber banjo / swivel union fitting to create the upper seal to the jet P/N 1/780.

£0.97
including VAT
Qty