Newly manufactured brass fuel taps and tank filter assemblies suitable for the Lister D stationary engines.
Equivalent to Lister P/N's D330, 12406, 1/1013C & 3197
The body of the tap incorporates 1/4" BSP threads, male - female and the tank filter is 1/2" BSP.
The filter is covered with brass gauze soldered into place.
Newly manufactured brass fuel tank filter assembly suitable for Lister D stationary engines.
Equivalent to Lister P/N 1/1013C
The body of the tank filter is 1/2" BSP on the tank side and 1/4" BSP on the tap side.
The filter is covered with brass gauze soldered into place.
Brass fuel taps 1/4" BSP male - female suitable for the Lister D stationary engines.
Equivalent to Lister P/N's D330
The body of the tap incorporates 1/4" BSP threads, male - female.
A "no frills" product for those on a budget.
Genuine AMAL carburetor float chamber assembly as used on Lister D engines.
Lister Part number 1A
Includes the float, float needle, float retaining clip, top cover with tickler and bottom inlet union.
Genuine AMAL carburetor float kit as used on Lister D engines.
Lister Part number RKC-525
Includes, float, float needle and retaining clip.
Genuine AMAL carburetor float needle as used on Lister D engines.
Lister Part number 14-024
Genuine AMAL carburetor float needle retaining clip as used on Lister D engines.
Lister Part number 4-230
Genuine AMAL float chamber cover assembly as used on Lister D engines.
Lister Part number 14-208A
Includes the tickler, tickler spring, tickler locking collar, tickler split pin and locking screw.
Genuine AMAL float chamber nut as used on Lister D engines.
Lister Part number 14-178
Genuine AMAL float chamber washer as used on Lister D engines.
Lister Part number 14-175
This washer sits at the base of the float chamber and creates a seal between the bottom of the float bowl and the fuel inlet union.
Not to be confused with the washers which sit either side of the banjo fitting / swivel union connecting the float chamber to the carburettor intake.
Genuine AMAL float chamber lower banjo / swivel union bottom washer as used on Lister D engines.
Lister Part number 4-053 or 5197. Sold individually
This washer sits under the float chamber banjo / swivel union fitting to create the lower seal.
Genuine Lister D float chamber brass banjo bolt P/N D319 or 001-00319
Lister part number D319 or 001-00319. Sold individually
This banjo bolt fixes the float chamber to the carburetor.
Click here
to subscribe for 'Back-in-stock' notifications
This is the upper sealing washer of the float chamber banjo / swivel union on Lister D engines.
Lister Part number D320. Sold individually
This washer sits on the top side the float chamber banjo / swivel union fitting to create the upper seal to the jet P/N 1/780.
This is the sealing washer that sits between the under side of the fuel tank and the fuel strainer on Lister D engines.
Lister Part number 12406. Sold individually.
British made Lister D carburetor air valve adjuster.
Equivelent to Lister part number A189.
Sold individually.
Manufactured from quality brass.
Replacement Lister D carburetor air valves.
Equivelent to Lister part number D109 or 004-00109
British made Lister D carburetor air valve springs.
Equivelent to Lister part number D100 or 004-00100
British made Lister D carburetor air valve adjuster lock nut.
Equivalent to Lister part number S583.
Sold individually.
Manufactured from quality brass.
Lister D carburettor air valve plate screws and spring washer set as used on Lister D carburettors to secure the small brass plate to the underside of the air intake casting.
This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.
A quality 1/4" BSP female brass nut and solder olive for 1/4" outside diameter tube.
Used on copper fuel / oil tube to give a female swivel connection as found on many stationary engines, tractors, classic motorcycles and cars etc.
These fittings can be either soft soldered or silver soldered.
-1c689e530d8e58ba6e2309e8134faf27.png)
A high quality Lister D copper fuel pipe with unions to run from the tanks fuel tap to the connection on the bottom of the carburettor float chamber.
Click here
to subscribe for 'Back-in-stock' notifications
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
