Genuine Lister JP and CS injector O ring P/N 010-03038
The early CS and JP engines had a cylinder head arrangement where the water jacket would drain upon removal of the injector from the head. A seal was formed between the head and the injector by this O ring which sat on a shoulder directly under the injector body.
A fuel pump tappet with roller, a commonly overlooked waering part which can often be the cause of poor fuel injection.
A genuine Bosch Mico injector, superb Bosch quality and supplied complete with the copper sealing washer.
A genuine Bosch Mico injector for the larger Listeroid 12-1 and 24-2 engines, superb Bosch quality and supplied complete with the copper sealing washer.
These are non genuine and a slightly different shape to the originals but still fit a British built engine without problems.
Equivalent to Lister Petter P/N 010-03031
A copper washer the correct size and thickness for sealing the injector to the cylinder head of all Lister CS and JP engines.
A replacement 6mm fuel pump element for use on fuel pumps fitted to original Lister CS 3-1 & 3.5-1 engines using CAV or Bryce pumps.
A replacement 7mm fuel pump element for use on fuel pumps fitted to original Lister CS engines using CAV or Bryce pumps.
A replacement fuel pump element for use in Bosch "032" series fuel pumps fitted to Listeroid CS engines.
A replacement fuel pump element for use in Bosch "034" series fuel pumps fitted to Listeroid CS engines.
Replacement BPF1B type fuel pump delivery valves. Available in either Bosch Mico or CAV equivalent.
High quality CAV, Delphi, Bosch Mico or equivalent injector nozzles for the Lister JP. Nozzle number BDL30S54 or it's equivalent DL30S1202 type as fitted to all the original Lister JP engines. These nozzles also fit most over sized Indian made CS clone engines (i.e 10-1, 12-1, 20-2 and 24-2).
Quality Whitworth studs commonly found on the Lister CS fuel injector securing hold down plate but could be used for any application requiring this size of Whitworth Stud.
For suitable sized nuts please see the Whitworth nuts section.
A quality 3/8" spring washer. This size is commonly used to fix the BPF1B type fuel injection pump in place on the Lister CS engines but could be used for any application requiring this size of Whitworth spring washer.