Fixings, Nuts & Studs

Products

Lister A, B & D Gib Key Puller
 
(0 reviews)  

Gib key pullers suitable for use on all Lister A, B & D engine types with a 1.5" diameter crankshaft.

Manufactured for Stationary Engine Parts Ltd to our own original concept and design. They are suitable for both spoked flywheels and solid types on all engines with a 1.5" diameter crankshaft.

We have upgraded the MkII puller from 12mm steel plate to 18mm bar stock to enable you to put some serious removal pressure on that key via the three large bolts. We are not promising this is the answer to all your stuck key problems but it should certainly give you a real fighting chance.

£34.98
including VAT
Qty Out of stock
Lister D Magneto Fixing Bolt & Washer Set
 
(0 reviews)  

Lister D magneto fixing bolt and washer set. This set comprises of three 3/8" BSW bolts / set screws equivalent to Lister part number S739 and three flat washers equivalent to Lister part number S184

£3.54
including VAT
Qty
M10 Brass Washers (Lister D Cylinder Head Washers)
 
(0 reviews)  

Top quality M10 brass washers.

These washers can be used under the brass dome nuts on Lister D engines making them suitable as replacements for Lister P/N S545 of which 5 are fitted to the Lister D cylinder head.

They are a smidgen tight on the 7/16" studs being that they are metric but can be teased on without too much difficulty given a little light filing and are the only practical solution now that imperial brass washers are so scarce.

£0.36
including VAT
Qty
Instruction & Identification Plate Hammer Drive Rivets
 
(0 reviews)  

No.4 x 1/4" Hammer Drive Screws/Rivets.

Brass electro plated finish.

To suit Lister engine nameplates. Pack of 20 (Approx)

Head diameter = 5mm, shank diameter = 2.9mm

£1.99
including VAT
Qty
Whitworth Stud 7/16 x 4,1/4
 
(0 reviews)  

Quality Whitworth studs commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth Stud.

For suitable sized nuts please see the Whitworth nuts section.

£3.42
including VAT
Qty
Whitworth Stud 7/16 x 5
 
(0 reviews)  
Quality Whitworth studs commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth Stud.

For suitable sized nuts please see the Whitworth nuts section.
£3.54
including VAT
Qty
Lister Oil Filler Flap Brass Wing Nut
 
(0 reviews)  
A genuine Lister new old stock brass wing nut for the oil filler flap of all Lister CS Diesel engines and Lister D petrol engines.
 
Part number 027-00687
£3.91
including VAT
Qty
Whitworth Bolt 5/16 x 1,1/4 Lister D Exhaust Flange
 
(0 reviews)  

Quality whitworth bolts commonly found on the crankcase breather of the Lister CS engines and also suitable for the exhaust flange of Lister D engines but could be used for any application requiring this size.
 

£0.78
including VAT
Qty
Lister D Brass Dome Nut, Set Of Three
 
(0 reviews)  
A set of three 7/16" Whitworth brass dome nuts as commonly found on the Lister D cylinder head but could be used for any application requiring this size of Whitworth nut.
£8.99
including VAT
Qty