Air & Exhaust

Air intake and exhaust silencer spares for the Lister CS and Listeroid engines.

Products

Whitworth Stud 3/8 x 1,1/2 Lister CS inlet & Exhaust Manifold
 
(1 reviews)  

Quality Whitworth studs commonly found on the air & exhaust manifold flanges and the tappet clamp of the Lister CS engines but could be used for any application requiring this size of stud.

£1.68
including VAT
Qty
Lister CS Air Filter Elbow With Mesh
 
(2 reviews)  
A 90' elbow made from cast iron with a rough mesh filter insert.
 
As found on most original Lister CS engines that were supplied with standard equipment.
£12.00
including VAT
Qty
Lister CS Exhaust Elbow
 
(2 reviews)  
A strong ninety degree bend for use on the exhaust outlet port of any CS type engine, can also be used on the air inlet, threaded with 1,1/2 BSP threads.
£13.18
including VAT
Qty
Lister CS J & L Exhaust Flange
 
(1 reviews)  

A solid cast flange with a female 1,1/2" BSP thread for use on the exhaust outlet port of Lister CS, J and L type engines.

The centre to centre distance of the stud holes is approx 3.5" which equates to about 90mm.

This flange can also be used on the air inlet of a CS engine if required.

Equivalent to Lister P/N 003-00135

£17.10
including VAT
Qty
Lister CS Air Filter Elbow
 
(1 reviews)  

A solid cast iron inlet elbow for use with Lister CS engines to mount an air filter assembly.

The size of the reduced section to mount the air filter on is approximately 44mm diameter.

£17.40
including VAT
Qty
Lister CS Pepper Pot Exhaust Silencer
 
(5 reviews)  

Good quality exhaust silencers suitable for Lister CS and L type engines and all other similar sized engine using a silencer with this thread size fitting. Supplied with a heat resistant black finish to help prevent corrosion and fitted with a male 1, 1/2" BSP threaded pipe for fitting directly into the exhaust elbow.

£26.40
including VAT
Qty
General Purpose Replaceable Paper Cartridge Air Filter
 
(9 reviews)  

A replaceable dry paper element type air filter assembly suitable for use on a huge variety of engines but especially Lister Petter engines.

£27.00
including VAT

Lister CS Oil Bath Air Filter
 
(3 reviews)  

A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to the intake elbow which is available separately.

£32.40
including VAT
Qty
Lister CS, B & L Exhaust Silencer / Intake Muffler
 
(2 reviews)  
A well made exhaust silencer with internal baffles for the Lister CS, B & L type engines.
 
A faithful copy of the original specification. The silencer has a 1,1/2" BSP male threaded pipe of approximately 3,1/2" long and the silencer measures 6" diameter by 2,3/4" deep.
 
These silencers were also used as an intake muffler for the Lister CS engines to reduce the noise of the air intake port of the engine.
£42.00
including VAT
Qty