Genuine Lister / Hepworth domed top Aluminium pistons complete with rings for spec 12 & 13 Lister F type engines 0.060" oversize.
Supplied complete with four rings, two compression rings and two oil control rings.
If you are lucky enough to own an example of the rare F type that would benafit from a rebore this is your lucky day!
Genuine Lister / Hepworth domed top Aluminium pistons complete with rings for spec 12 & 13 Lister F type engines 0.040" oversize.
Supplied complete with four rings, two compression rings and two oil control rings.
If you are lucky enough to own an example of the rare F type that would benafit from a rebore this is your lucky day!
Good quality piston assembly for Lister LD engines on 040" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Good quality piston assembly for Lister LD engines on 030" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Genuine Lister / Hepolite piston assembly for Lister LD engines on 010" over size.
These piston assemblies comprise of:- 1 x Piston equivalent to P/N 201-10082 and 1 x Piston ring set equivalent to P/N 570-12110 which combined is equivalent to P/N 570-10110
The piston assembly includes the rings, gudgeon pin and circlips.
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Lister TX engines.
Equivalent to P/N 11-108GA and 11-108GB compatible with pump FAOANO80E0846
Please check suitability for your exact pump before purchasing, contact us for assistance if you are unsure.
-48303294b8f81d25b2a5bfaccf7e9052.png)
New, high quality piston ring set suitable for Lister J petrol engines and Lister K kerosene engines with a 4.25” + 0.010" bore.
Compression Ring Dimensions:
- Bore size 4.26” (108.2mm)
- Height 1/4” (6.35mm)
- Radial depth 0.165” (4.191mm)
Oil Scraper Ring Dimensions:
- Bore size 4.26” (108.2mm)
- Height 1/4” (6.35mm)
- Radial depth 0.155” (3.937mm)
Please note: All rings will need to be gapped to suit your cylinder bore. As a general rule of thumb piston rings on vintage engines should have 0.003” of end gap per 1” of cylinder bore diameter (i.e. 4.25” bore would need 0.01275” ring end gap). Be sure to gap your rings on the smallest or unworn part of your bore, on worn or older engines that have not had a new liner fitted this would normally be towards the bottom.
-2926d63ace675fe720028f6261227a57.png)
New, high quality piston ring set suitable for Lister J petrol engines and Lister K kerosene engines with a 4.25” +0.010" bore.
This is a 3 ring set with 3 plain compression rings.
Compression Ring Dimensions:
- Bore size 4.26” (108.2mm)
- Height 1/4” (6.35mm)
- Radial depth 0.165” (4.191mm)
Please note: All rings will need to be gapped to suit your cylinder bore. As a general rule of thumb piston rings on vintage engines should have 0.003” of end gap per 1” of cylinder bore diameter (i.e. 4.25” bore would need 0.01275” ring end gap). Be sure to gap your rings on the smallest or unworn part of your bore, on worn or older engines that have not had a new liner fitted this would normally be towards the bottom.
-988ea01da4bca9599461b534843aa294.png)
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares
Fuel Injection
Water Pumps & Spares
Books & Transfers
Starting Handles (18)
Wolseley Engine Spares (33)
Ruston Hornsby Spares (28)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Amanco Engine Spares (11)
Crossley Engine Spares (5)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (24)
Plastigauge
Clearance Corner (12)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
