STATIONARY ENGINE PARTS LTD
Home
About Us
Quality Control
Contact us
Terms
Checkout
Basket |
Go to checkout
Total Items:
0
Total Order Value:
£0.00
Search:
Gaskets
Cylinder, piston, rings & con rod
Valve gear, cam shaft, rocker & timing
Oil pump & lubrication
Fuel tank, pump, injector, pipes & govenor etc
Crankshaft & bearings
Cylinder head & COV
Water & cooling
Air & exhaust
Starting handle, breather & crank case fittings
New section!
Parts unique to 3-1 & 3.5-1 engines
Parts unique to twin cylinder engines
Home
>
Products
>
Lister CS type engine spares
>
Fuel tank, pump, injector, pipes & governor etc
Fuel tank, pump, injector, pipes & governor etc
CS Fuel tank assembly
OUR PRICE
£48.93
incl. VAT
A complete 8 litre fuel tank assembly suitable for both new and old engines. Supplied complete with mounting brackets, bolts, straps and a brass fuel shut off valve for the bottom of the tank. The cap on the top is a conventional bayonet fitting with a rubber seal.
QTY
Fuel tank assembly ... £48.93
Petter type fuel tank
OUR PRICE
£44.03
incl. VAT
Ok, so it shouldn’t really be in the CS parts section but we didn’t really know where else to put it.
A very good quality copy of the Petter type fuel tank complete with a nice cast iron mounting bracket and some tank straps. The cast iron mounting bracket would lend itself well to being bolted onto almost anything so this may well be suitable for many other engine types.
QTY
Petter type fuel tank ... £44.03
Fuel shut off valve with hose tail
OUR PRICE
£8.56
incl. VAT
A good quality brass fuel shut off valve with a threaded inlet for connection to the fuel tank etc and a 1/2" hose tail connection for the connection of PVC or rubber pipe.
QTY
Fuel shut off valve ... £8.56
Fuel shut off valve
OUR PRICE
£8.56
incl. VAT
A good quality brass fuel shut off valve with threaded ends for connection to the fuel tank and pipe.
QTY
Fuel shut off valve ... £8.56
Cast iron fuel filter assembly
OUR PRICE
£39.14
incl. VAT
A cast iron fuel filter assembly with bleed nipple on the top and standard banjo connection for fuel in and out.
QTY
Cast iron fuel filter assembly ... £39.14
Fuel filter wick
OUR PRICE
£7.33
incl. VAT
Old type fuel filter wick for use in the standard cast iron fuel filter. Measures 1m long that’s about 40" in imperial. Comes complete with metal nipple for a straight forward swap.
QTY
Fuel filter wick ... £7.33
Cartridge type fuel filter
OUR PRICE
£11.50
incl. VAT
This is the Indian replacement for the old cast iron type fuel filter with a wick. It has a replaceable cartridge element inside the container. If you have bought a paramount engine this is the type of filter you will have, its also highly likely to be the same as found on other Indian brand engines.
The cartridge can be purchased separately for service changes from the menu below.
SELECT YOUR CHOICE
Cartridge type fuel filter
... £11.50
Fuel filter replacement cartridge
... £2.24
QTY
Banjo fitting
OUR PRICE
£4.88
incl. VAT
A superb quality single banjo fitting suitable for use on the CS fuel system, offers flexibility when you might want to form custom fuel lines for your own individual setup. Plated for corrosion resistance.
QTY
Banjo fitting ... £4.88
Fuel line Dowty seals
OUR PRICE
£0.35
incl. VAT
Fed up with copper washers leaking on your fuel banjo connections? We have the ideal solution! These Dowty seals are a superior replacement seal for your fuel line eliminating any leaks by having a small inner Nitrile rubber ring within the metal ring. The Nitrile rubber is rated for maximum continuous temperature of 110'C and is fully resistant to Diesel, Kerosene, Bio diesel, all known vegetable and animal fats, petrol, paraffin and a whole lot more which I have never even heard of.
QTY
Fuel line Dowty seals ... £0.35
Fuel pipe, filter to pump
OUR PRICE
£6.84
incl. VAT
Banjo type fuel pipe suitable for use between the pump and the filter.
QTY
Fuel pipe (pump to filter) ... £6.84
Fuel pipe, tank to filter
OUR PRICE
£11.50
incl. VAT
For older engines a flexible fuel pipe to go between the fuel tank and the filter, female thread at one end and standard banjo fitting at the other. For newer engines a solid pipe with threaded unions on either end.
SELECT YOUR CHOICE
Flexible for old engines
... £11.50
Solid for new engines
... £6.89
QTY
High pressure fuel line
OUR PRICE
£14.67
incl. VAT
High pressure fuel line for connection between the fuel pump exit and the injector inlet, part number 8-3-157. Suitable for fitting to single cylinder CS engines, and the No, 1 cylinder on twin cylinder engines.
QTY
High pressure fuel line ... £14.67
High pressure fuel line 27.5" long
OUR PRICE
£14.67
incl. VAT
High pressure fuel line for connection between the fuel pump exit and the injector inlet. These were manufactured bespoke for a customer as a replacement for Lister CD and CE engines so some extra were also made for general stock.
QTY
High pressure fuel line 27.5" long ... £14.67
Bosch Mico fuel pump
OUR PRICE
£88.08
incl. VAT
A genuine Bosch Mico fuel pump nicely painted in black.
QTY
Bosch Mico fuel pump. ... £88.08
Fuel pump delivery valve
OUR PRICE
£9.78
incl. VAT
A replacement Bosch Mico fuel pump delivery valve. This Bosch unit is also understood to be suitable as a replacement for the CAV fuel pumps.
QTY
