STATIONARY ENGINE PARTS LTD
Home
About Us
Quality Control
Contact us
Terms
Checkout
Basket |
Go to checkout
Total Items:
0
Total Order Value:
£0.00
Search:
Gaskets
Cylinder, piston, rings & con rod
Valve gear, cam shaft, rocker & timing
Oil pump & lubrication
Fuel tank, pump, injector, pipes & govenor etc
Crankshaft & bearings
Cylinder head & COV
Water & cooling
Air & exhaust
Starting handle, breather & crank case fittings
New section!
Parts unique to 3-1 & 3.5-1 engines
Parts unique to twin cylinder engines
Home
>
Products
>
Lister CS type engine spares
>
Air & exhaust
Air & exhaust
Cartridge air filter
OUR PRICE
£16.63
incl. VAT
A replaceable cartridge type air filter suitable for use on all sorts of engines but particularly lends itself well to Lister and Petter engines. The filter has a jubilee type hose clamp on the bottom for fitting to an inlet elbow, which is available separately.
The replacement cartridges are also available separately from the menu for service replacements.
SELECT YOUR CHOICE
Cartridge air filter assembly
... £16.63
Replacement cartridge
... £4.88
QTY
Oil bath air filter
OUR PRICE
£15.65
incl. VAT
A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to an elbow (sold separately), comes with a butterfly nut on the top for easy removal of the top cover to gain access to the filter element. The filter element is made of a coarse wire wool type material.
QTY
Oil bath air filter ... £15.65
Air filter elbow
OUR PRICE
£10.34
incl. VAT
A 90' elbow made from cast iron for use with either of our air filter assemblies.
QTY
Air filter elbow. ... £10.34
Exhaust silencer
OUR PRICE
£17.61
incl. VAT
Top quality exhaust silencer suitable for the CS engine, supplied with a heat resistant black finish help prevent corrosion and has a male 1,1/2" BSP threaded pipe for fitting directly into the exhaust elbow.
QTY
Exhaust silencer ... £17.61
Exhaust flange
OUR PRICE
£6.84
incl. VAT
A solid cast flange with a female 1,1/2" BSP thread for use on the exhaust outlet port of any CS engine. The centre to centre distance of the stud holes is 3.5" which equates to about 90mm. This flange can also be used on the air inlet of a CS engine if you wish.
QTY
Exhaust flange ... £6.84
Exhaust elbow
OUR PRICE
£8.80
incl. VAT
A strong ninety degree bend for use on the exhaust outlet port of any CS type engine, can also be used on the air inlet, threaded with 1,1/2 BSP threads.
QTY
Exhaust elbow ... £8.80
